Skip to main content
Arduino

Return to Question

Improved the formatting.
Source Link
sa_leinad
sa_leinad
  • 3.2k
  • 2
  • 24
  • 53

UnfortunatelyEdit:
Unfortunately the question that has been linked to my question does not answer my question. I have followed its instructions but it is a slightly different issue. Any help on my question would be hugely appreciated:

 

Apologies but iI am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

So iI know that that my iMac is recognising the Arduino but iI am still not able to upload any code to it. I have spent hours trying work around solutions iI have found on the internet or Elegoo have sent me.

I have three questions. Firstly if iI just buy a real Arduino from Arduino (I had not realised iI was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that iI would be able to implement? I a resnoblyam reasonably computer literate but not to the level of diving in tointo the Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

Many Thanks in advance, any help would be so appreciated by a beginner!

Thank you

Paddy

Unfortunately the question that has been linked to my question does not answer my question. I have followed its instructions but it is a slightly different issue. Any help on my question would be hugely appreciated:

Apologies but i am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

So i know that that my iMac is recognising the Arduino but i am still not able to upload any code to it. I have spent hours trying work around solutions i have found on the internet or Elegoo have sent me.

I have three questions. Firstly if i just buy a real Arduino from Arduino (I had not realised i was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that i would be able to implement? I a resnobly computer literate but not to the level of diving in to Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

Many Thanks in advance, any help would be so appreciated by a beginner!

Thank you

Paddy

Edit:
Unfortunately the question that has been linked to my question does not answer my question. I have followed its instructions but it is a slightly different issue. Any help on my question would be hugely appreciated:

 

Apologies but I am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

So I know that that my iMac is recognising the Arduino but I am still not able to upload any code to it. I have spent hours trying work around solutions I have found on the internet or Elegoo have sent me.

I have three questions. Firstly if I just buy a real Arduino from Arduino (I had not realised I was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that I would be able to implement? I am reasonably computer literate but not to the level of diving into the Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

I am trying to explain that the linked question covers a different topic as i am unsure how to 'unlink' my question.
Source Link
Paddy
Paddy
  • 23
  • 6

Unfortunately the question that has been linked to my question does not answer my question. I have followed its instructions but it is a slightly different issue. Any help on my question would be hugely appreciated:

Apologies but i am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

So i know that that my iMac is recognising the Arduino but i am still not able to upload any code to it. I have spent hours trying work around solutions i have found on the internet or Elegoo have sent me.

I have three questions. Firstly if i just buy a real Arduino from Arduino (I had not realised i was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that i would be able to implement? I a resnobly computer literate but not to the level of diving in to Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

Many Thanks in advance, any help would be so appreciated by a beginner!

Thank you

Paddy

Apologies but i am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

So i know that that my iMac is recognising the Arduino but i am still not able to upload any code to it. I have spent hours trying work around solutions i have found on the internet or Elegoo have sent me.

I have three questions. Firstly if i just buy a real Arduino from Arduino (I had not realised i was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that i would be able to implement? I a resnobly computer literate but not to the level of diving in to Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

Many Thanks in advance, any help would be so appreciated by a beginner!

Thank you

Paddy

Unfortunately the question that has been linked to my question does not answer my question. I have followed its instructions but it is a slightly different issue. Any help on my question would be hugely appreciated:

Apologies but i am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

So i know that that my iMac is recognising the Arduino but i am still not able to upload any code to it. I have spent hours trying work around solutions i have found on the internet or Elegoo have sent me.

I have three questions. Firstly if i just buy a real Arduino from Arduino (I had not realised i was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that i would be able to implement? I a resnobly computer literate but not to the level of diving in to Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

Many Thanks in advance, any help would be so appreciated by a beginner!

Thank you

Paddy

I was asked by the forum to explain how my question is different to the one asking why the arduino is not recognised by a computer. Mine is recognised it just will not allow me to upload code, and gives me the errors above in my question.
Source Link
Paddy
Paddy
  • 23
  • 6

Apologies but i am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

So i know that that my iMac is recognising the Arduino but i am still not able to upload any code to it. I have spent hours trying work around solutions i have found on the internet or Elegoo have sent me.

I have three questions. Firstly if i just buy a real Arduino from Arduino (I had not realised i was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that i would be able to implement? I a resnobly computer literate but not to the level of diving in to Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

Many Thanks in advance, any help would be so appreciated by a beginner!

Thank you

Paddy

Apologies but i am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

I have spent hours trying work around solutions i have found on the internet or Elegoo have sent me.

I have three questions. Firstly if i just buy a real Arduino from Arduino (I had not realised i was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that i would be able to implement? I a resnobly computer literate but not to the level of diving in to Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

Many Thanks in advance, any help would be so appreciated by a beginner!

Thank you

Paddy

Apologies but i am very new and trying to learn how to use the Arduino. I bought a starter kit from Elegoo the included an Arduino Uno (I think it is a knock off and no the real thing?). I Have been trying to get the code to upload on to it and keep getting the following errors:

Sketch uses 2282 bytes (7%) of program storage space. Maximum is 32256 bytes. Global variables use 212 bytes (10%) of dynamic memory, leaving 1836 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00

So i know that that my iMac is recognising the Arduino but i am still not able to upload any code to it. I have spent hours trying work around solutions i have found on the internet or Elegoo have sent me.

I have three questions. Firstly if i just buy a real Arduino from Arduino (I had not realised i was being sent an imitation) will this solve my problems?

Secondly, if not can anyone recommend a work around that i would be able to implement? I a resnobly computer literate but not to the level of diving in to Terminal and inputting lots of code!

Thirdly, I am really struggling being a beginner with the instructions given by Elegoo, they are very badly translated and confusing. Can anyone recommend a way to learn the basics and complete some basic projects for a beginner. I am happy to pay for the tutorials if needed.

Many Thanks in advance, any help would be so appreciated by a beginner!

Thank you

Paddy

Source Link
Paddy
Paddy
  • 23
  • 6