I have a raspberry pi 4 I flashed an sd card with ubuntu server 18.0.4 arm image but it wont boot. there is no image on my tv. I have tried both raspberry imager and etcher and both write to sd card. I have tried editing network -config with my wifi details but when I scan with nmap my other machines show up but my does not. please help.
7
- What do you see on the LED-States when the Pi is switched on? The green led should start blinking wildly after a few seconds.PMF– PMF2020-11-04 15:59:34 +00:00Commented Nov 4, 2020 at 15:59
- it turns red and just stays redJohn Bradshaw– John Bradshaw2020-11-04 16:03:26 +00:00Commented Nov 4, 2020 at 16:03
- What adapter are you using? Sounds like it doesn't get enough juice.Swedgin– Swedgin2020-11-04 16:08:02 +00:00Commented Nov 4, 2020 at 16:08
- 1@JohnBradshaw: Check that its output is also 15W(atts) or 3A(mperes). All USB power supplys have 5V(olts) as output, but the maximum power is relevant.PMF– PMF2020-11-04 16:34:33 +00:00Commented Nov 4, 2020 at 16:34
- 2This is a Duplicate. Edit your original Question and include the missing details. NOTE the Red PWR LED on the later model Pi DOES NOT indicate good power - it ONLY works with code in the kernel (although no one knows what the Canonical kernel does). Buy a proper Power Supply. CHARGERS are NOT Power Supplies.Milliways– Milliways2020-11-04 23:20:07 +00:00Commented Nov 4, 2020 at 23:20
| Show 2 more comments