| 453 | Stepconf wizard: lathe and shared limit & home switches = joint limit error. | future-release | open | | 2016-01-01 | 2016-01-01 | 1 | |
| 452 | Logging | 2.5.next | open | | 2015-12-26 | 2015-12-26 | 5 | |
| 450 | gscreen and gmoccapy startup error | future-release | open | | 2015-11-16 | 2015-11-16 | 5 | |
| 438 | F-word incorrectly affects treading (G33/G76) | 2.7 | open | | 2015-09-28 | 2015-09-28 | 5 | |
| 437 | M67 causes motion glitch | 2.7 | open | | 2015-09-12 | 2015-10-01 | 5 | |
| 436 | hy_VFD no RPM fedback from spindle-speed-fb pin after M5 command | 2.7 | open | Sebastian Kuzminsky | 2015-09-12 | 2015-09-14 | 9 | |
| 432 | state-tags-master: units problem when running gcode from a file | future-release | open | | 2015-08-21 | 2015-08-21 | 5 | |
| 431 | state-tags-master: confused state after M02 | future-release | open | | 2015-08-21 | 2015-08-21 | 5 | |
| 427 | Halui Output Pins slow to operate after and including 2.6.6 release | 2.6 | open | | 2015-07-21 | 2015-07-28 | 1 | |
| 425 | Tool Offset remap fails first time around | future-release | open | andypugh | 2015-06-11 | 2015-06-11 | 1 | |
| 422 | [TRAJ]MAX_VELOCITY - does not affect motion | 2.7 | open | | 2015-04-03 | 2015-04-03 | 7 | |
| 421 | G96 CSS bug in sim lathe | 2.6 | open | | 2015-03-10 | 2015-03-10 | 1 | |
| 418 | motion docs are out of date | 2.7 | open | | 2015-02-22 | 2015-02-22 | 5 | |
| 416 | Parallel port: multiple 'Amplifier enable' pins needed. Only one works | 2.6 | open | | 2015-02-22 | 2015-10-29 | 1 | |
| 415 | hal_parport.ko not loading in 2.7 | 2.7 | open | | 2015-02-16 | 2015-02-21 | 1 | |
| 414 | obsolete environment variable in holecircle.py | 2.6 | open | | 2015-01-28 | 2015-01-29 | 5 | |
| 413 | docs: parport diagrams are illegible | 2.6 | open | | 2015-01-10 | 2015-01-10 | 5 | |
| 412 | linuxcnc Helix movement power off bug if the feed rate is over supported | 2.6 | open | | 2015-01-07 | 2015-01-07 | 5 | |
| 409 | standardize handling of [DISPLAY]POSITION_OFFSET in our guis | 2.6 | open | | 2014-12-19 | 2014-12-19 | 5 | |
| 408 | CSS in Gmoccapy does not function correctly from MDI | 2.6 | open | | 2014-11-24 | 2014-11-24 | 1 | |
| 404 | pncconf accepts multiple PWM & encoder channels for the same axis | 2.7 | open | | 2014-10-31 | 2014-10-31 | 5 | |
| 403 | pncconf "Launch test panel" button doesn't do anything | 2.7 | open | | 2014-10-31 | 2014-10-31 | 5 | |
| 401 | pncconf allows configuration of steppers and encoders, but makes invalid hal files | future-release | open | | 2014-10-30 | 2014-10-30 | 5 | |
| 399 | pncconf in 2.6.3 prints scary warnings at startup | 2.6 | open | | 2014-10-30 | 2015-01-08 | 5 | |
| 398 | clean up M19 implementation & documentation | future-release | open | | 2014-10-29 | 2014-10-29 | 5 | |
