Menu ▾ ▴
Tree [647c56] 3.2 / History
Ethan A Merritt Read Me
DOCUMENTATION FOR GNUPLOT TERMINAL DRIVER WRITERS By Russell Lang 1/90 Information on each terminal device driver is contained in term.c and the term/*.trm files. Each driver is contained in a .trm file and is #include'd into term.c. Each driver has a set of initialisers in term.c for term_tbl[], an array of struct termentry. Here is the definition of the struct termentry from plot.h: struct termentry { char *name; char *description; unsigned int xmax,ymax,v_char,h_char,v_tic,h_tic; FUNC_PTR options,init,reset,text,scale,graphics,move,vector,linetype, put_text,text_angle,justify_text,point,arrow; }; Here's a brief description of each variable: The char *name is a pointer to a string containing the name of the terminal. This name is used by the 'set terminal' and 'show terminal' commands. The name must be unique and must not be confused with an abbreviation of another name. For example if the name "postscript" exists, it is not possible to have another name "postscript2". Keep the name under 15 characters. The char *description is a pointer to a string containing a description of the terminal, which is displayed in response to the 'set terminal' command. Keep the description under 60 characters. xmax is the maximum number of points in the x direction. The range of points used by gnuplot is 0 to xmax-1. ymax is the maximum number of points in the y direction. The range of points used by gnuplot is 0 to ymax-1. v_char is the height of characters, in the same units as xmax and ymax. The border for labelling at the top and bottom of the plot is calculated using v_char. v_char is used as the vertical line spacing for characters. h_char is the width of characters, in the same units as xmax and ymax. The border for labelling at the left and right of the plot is calculated using h_char. If the _justify_text function returns FALSE, h_char is used to justify text right or centre. If characters are not fixed width, then the _justify_text function must correctly justify the text. v_tic is the vertical size of tics along the x axis, in the same units as ymax. h_tic is the horizontal size of tics along the y axis, in the same units as xmax. Here's a brief description of what each term.c function does: _options() Called when terminal type is selected. This procedure should parse options on the command line. A list of the currently selected options should be stored in term_options[] in a form suitable for use with the set term command. term_options[] is used by the save command. Use options_null() if no options are available. _init() Called once, when the device is first selected. This procedure should set up things that only need to be set once, like handshaking and character sets etc... _reset() Called when gnuplot is exited, the output device changed or the terminal type changed. This procedure should reset the device, possibly flushing a buffer somewhere or generating a form feed. _scale(xs,ys) Called just before _graphics(). This takes the x and y scaling factors as information. If the terminal would like to do its own scaling, it returns TRUE. Otherwise, it can ignore the information and return FALSE: do_plot will do the scaling for you. null_scale is provided to do just this, so most drivers can ignore this function entirely. The Latex driver is currently the only one providing its own scaling. _graphics() Called just before a plot is going to be displayed. This procedure should set the device into graphics mode. Devices which can't be used as terminals (like plotters) will probably be in graphics mode always and therefore won't need this. _text() Called immediately after a plot is displayed. This procedure should set the device back into text mode if it is also a terminal, so that commands can be seen as they're typed. Again, this will probably do nothing if the device can't be used as a terminal. _move(x,y) Called at the start of a line. The cursor should move to the (x,y) position without drawing. _vector(x,y) Called when a line is to be drawn. This should display a line from the last (x,y) position given by _move() or _vector() to this new (x,y) position. _linetype(lt) Called to set the line type before text is displayed or line(s) plotted. This procedure should select a pen color or line style if the device has these capabilities. lt is an integer from -2 to 0 or greater. An lt of -2 is used for the border of the plot. An lt of -1 is used for the X and Y axes. lt 0 and upwards are used for plots 0 and upwards. If _linetype() is called with lt greater than the available line types, it should map it to one of the available line types. Most drivers provide 9 different linetypes (lt is 0 to 8). _put_text(x,y,str) Called to display text at the (x,y) position, while in graphics mode. The text should be vertically (with respect to the text) justified about (x,y). The text is rotated according to _text_angle and then horizontally (with respect to the text) justified according to _justify_text. _text_angle(ang) Called to rotate the text angle when placing the y label. If ang = 0 then text is horizontal. If ang = 1 then text is vertically upwards. Returns TRUE if text can be rotated, FALSE otherwise. _justify_text(mode) Called to justify text left, right or centre. If mode = LEFT then text placed by _put_text is flushed left against (x,y). If mode = CENTRE then centre of text is at (x,y). If mode = RIGHT then text is placed flushed right against (x,y). Returns TRUE if text can be justified Returns FALSE otherwise and then _put_text assumes text is flushed left; justification of text is then performed by calculating the text width using strlen(text) * h_char. _point(x,y,point) Called to place a point at position (x,y). point is -1 or an integer from 0 upwards. 6 point types (numbered 0 to 5) are normally provided. Point type -1 is a dot. If point is more than the available point types then it should be mapped back to one of the available points. Two _point() functions called do_point() and line_and_point() are provided in term.c and should be suitable for most drivers. do_point() draws the points in the current line type. If your driver uses dotted line types (generally because it is monochrome), you should use line_and_point() which changes to line type 0 before drawing the point. line type 0 should be solid. _arrow(sx,sy,ex,ey,head) Called to draw an arrrow from (sx,sy) to (ex,ey). A head is drawn on the arrow if head = TRUE. An _arrow() function called do_arrow() is provided in term.c which will draw arrows using the _move() and _vector() functions. Drivers should use do_arrow unless it causes problems. The following should illustrate the order in which calls to these routines are made: _init() _scale(xs,ys) _graphics() _linetype(lt) _move(x,y) _vector(x,y) _point(x,y,point) _text_angle(angle) _justify(mode) _put_text(x,y,text) _arrow(sx,sy,ex,ey) _text() _graphics() . . _text() _reset() 
