Saw some post about deleting the file iwlwifi-ty-a0-gf-a0.pnvm in /lib/firmware but I don't see that file in my /lib/firmware directory. Could it be somewhere else or is that an old fix?

dmesg | grep iwlwifi

[ 3.956693] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)

[ 3.968428] iwlwifi 0000:04:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0-59.ucode

[ 3.968437] iwlwifi 0000:04:00.0: api flags index 2 larger than supported by driver

[ 3.968452] iwlwifi 0000:04:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 93.8.63.28

[ 3.968672] iwlwifi 0000:04:00.0: loaded firmware version 59.601f3a66.0 ty-a0-gf-a0-59.ucode op_mode iwlmvm

[ 3.968682] iwlwifi 0000:04:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)

[ 4.102730] iwlwifi 0000:04:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420

[ 4.258916] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0.pnvm (-2)

[ 4.328799] iwlwifi 0000:04:00.0: base HW address: a4:6b:b6:3d:61:fc

─# ip a

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 8c:04:ba:99:7c:57 brd ff:ff:ff:ff:ff:ff inet 192.168.1.218/24 brd 192.168.1.255 scope global dynamic noprefixroute eth0 valid_lft 82392sec preferred_lft 82392sec inet6 fe80::8e04:baff:fe99:7c57/64 scope link noprefixroute valid_lft forever preferred_lft forever

3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 72:4b:92:74:8c:bc brd ff:ff:ff:ff:ff:ff permaddr a4:6b:b6:3d:61:fc

I run

ip link set wlan0 up

Anyone have any thoughts would be much appreciated. Thank you,

Saw some post about deleting the file iwlwifi-ty-a0-gf-a0.pnvm in /lib/firmware but I don't see that file in my /lib/firmware directory. Could it be somewhere else or is that an old fix?

# dmesg | grep iwlwifi [ 3.956693] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002) [ 3.968428] iwlwifi 0000:04:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0-59.ucode [ 3.968437] iwlwifi 0000:04:00.0: api flags index 2 larger than supported by driver [ 3.968452] iwlwifi 0000:04:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 93.8.63.28 [ 3.968672] iwlwifi 0000:04:00.0: loaded firmware version 59.601f3a66.0 ty-a0-gf-a0-59.ucode op_mode iwlmvm [ 3.968682] iwlwifi 0000:04:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [ 4.102730] iwlwifi 0000:04:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 4.258916] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-ty-a0-gf-a0.pnvm (-2) [ 4.328799] iwlwifi 0000:04:00.0: base HW address: a4:6b:b6:3d:61:fc # ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope hostg valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 8c:04:ba:99:7c:57 brd ff:ff:ff:ff:ff:ff inet 192.168.1.218/24 brd 192.168.1.255 scope global dynamic noprefixroute eth0 valid_lft 82392sec preferred_lft 82392sec inet6 fe80::8e04:baff:fe99:7c57/64 scope link noprefixrouteg valid_lft forever preferred_lft forever 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 72:4b:92:74:8c:bc brd ff:ff:ff:ff:ff:ff permaddr a4:6b:b6:3d:61:fc 

I run:

ip link set wlan0 up 

Anyone have any thoughts would be much appreciated.