Im trying make my plymouth-git work Im on Arch Linux
When i restart or shutdown, the plymouth init and appears the theme i choosed
But when the PC boot, it doesn't appear the theme, it only appears a grey screen and white 3 dots
/etc/mkinitcpio.conf
# vim:set ft=sh # MODULES # The following modules are loaded before any boot hooks are # run. Advanced users may wish to specify all system modules # in this array. For instance: # MODULES=(piix ide_disk reiserfs) MODULES=() # BINARIES # This setting includes any additional binaries a given user may # wish into the CPIO image. This is run last, so it may be used to # override the actual binaries included by a given hook # BINARIES are dependency parsed, so you may safely ignore libraries BINARIES=() # FILES # This setting is similar to BINARIES above, however, files are added # as-is and are not parsed in any way. This is useful for config files. FILES=() # HOOKS # This is the most important setting in this file. The HOOKS control the # modules and scripts added to the image, and what happens at boot time. # Order is important, and it is recommended that you do not change the # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for # help on a given hook. # 'base' is _required_ unless you know precisely what you are doing. # 'udev' is _required_ in order to automatically load modules # 'filesystems' is _required_ unless you specify your fs modules in MODULES # Examples: ## This setup specifies all modules in the MODULES setting above. ## No raid, lvm2, or encrypted root is needed. # HOOKS=(base) # ## This setup will autodetect all modules for your system and should ## work as a sane default # HOOKS=(base udev autodetect block filesystems) # ## This setup will generate a 'full' image which supports most systems. ## No autodetection is done. # HOOKS=(base udev block filesystems) # ## This setup assembles a pata mdadm array with an encrypted root FS. ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. # HOOKS=(base udev block mdadm encrypt filesystems) # ## This setup loads an lvm2 volume group on a usb device. # HOOKS=(base udev block lvm2 filesystems) # ## NOTE: If you have /usr on a separate partition, you MUST include the # usr, fsck and shutdown hooks. HOOKS=(base udev plymouth autodetect modconf block filesystems keyboard fsck) # COMPRESSION # Use this to compress the initramfs image. By default, zstd compression # is used. Use 'cat' to create an uncompressed image. #COMPRESSION="zstd" #COMPRESSION="gzip" #COMPRESSION="bzip2" #COMPRESSION="lzma" #COMPRESSION="xz" #COMPRESSION="lzop" #COMPRESSION="lz4" # COMPRESSION_OPTIONS # Additional options for the compressor #COMPRESSION_OPTIONS=() /etc/default/grub
# GRUB boot loader configuration GRUB_DEFAULT=0 GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR="Arch" GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3 quiet splash vt.global_cursor_default=0" GRUB_CMDLINE_LINUX="" # Preload both GPT and MBR modules so that they are not missed GRUB_PRELOAD_MODULES="part_gpt part_msdos" # Uncomment to enable booting from LUKS encrypted devices #GRUB_ENABLE_CRYPTODISK=y # Set to 'countdown' or 'hidden' to change timeout behavior, # press ESC key to display menu. GRUB_TIMEOUT_STYLE=menu # Uncomment to use basic console GRUB_TERMINAL_INPUT=console # Uncomment to disable graphical terminal #GRUB_TERMINAL_OUTPUT=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=auto # Uncomment to allow the kernel use the same resolution used by grub GRUB_GFXPAYLOAD_LINUX=keep # Uncomment if you want GRUB to pass to the Linux kernel the old parameter # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx" #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries GRUB_DISABLE_RECOVERY=true # Uncomment and set to the desired menu colors. Used by normal and wallpaper # modes only. Entries specified as foreground/background. #GRUB_COLOR_NORMAL="light-blue/black" #GRUB_COLOR_HIGHLIGHT="light-cyan/blue" # Uncomment one of them for the gfx desired, a image background or a gfxtheme #GRUB_BACKGROUND="/path/to/wallpaper" #GRUB_THEME="/path/to/gfxtheme" # Uncomment to get a beep at GRUB start #GRUB_INIT_TUNE="480 440 1" # Uncomment to make GRUB remember the last selection. This requires # setting 'GRUB_DEFAULT=saved' above. #GRUB_SAVEDEFAULT=true # Uncomment to disable submenus in boot menu #GRUB_DISABLE_SUBMENU=y # Probing for other operating systems is disabled for security reasons. Read # documentation on GRUB_DISABLE_OS_PROBER, if still want to enable this # functionality install os-prober and uncomment to detect and include other # operating systems. GRUB_DISABLE_OS_PROBER=false /etc/plymouth/plymouthd.conf
# Set your plymouth configuration here. [Daemon] Theme=spinfinity ShowDelay=0 DeviceTimeout=8 lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Complex 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) I/O Memory Management Unit 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge 00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port 00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge 00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port 00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Carrizo Platform Security Processor 00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Carrizo Audio Dummy Host Bridge 00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Audio Controller 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20) 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 49) 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 49) 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4a) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 0 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 5 05:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43bc (rev 02) 05:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] Device 43b8 (rev 02) 05:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b3 (rev 02) 06:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 06:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 06:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 06:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) 1e:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) 22:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1) 22:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller (rev a1) Can somewhone help :(?
