MPLS-TP Next-Hop Ethernet Addressing
draft-fbb-mpls-tp-ethernet-addressing-01
| Document | Type | Replaced Internet-Draft (individual) Expired & archived | |
|---|---|---|---|
| Authors | Matthew Bocci , Dan Frost , Stewart Bryant | ||
| Last updated | 2012-02-08 (Latest revision 2011-11-30) | ||
| Replaced by | draft-ietf-mpls-tp-ethernet-addressing | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-mpls-tp-ethernet-addressing | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
The Multiprotocol Label Switching (MPLS) Transport Profile (MPLS-TP) is the set of MPLS protocol functions applicable to the construction and operation of packet-switched transport networks. This document presents considerations for link-layer addressing of Ethernet frames carrying MPLS-TP packets. This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunication Union Telecommunication Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and PWE3 architectures to support the capabilities and functionalities of a packet transport network.
Authors
Matthew Bocci
Dan Frost
Stewart Bryant
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)