DEV Community

Elmer Urbina
Elmer Urbina

Posted on

Build a Smart Object Detection Alarm with Arduino & HC-SR04 Sensor – Full Tutorial

#arduino #ai #security #distributedsystems

Introduction

In this hands-on project, we successfully designed and built a smart object detection alarm using an Arduino UNO and an HC-SR04 ultrasonic sensor. The system detects objects within a predefined range and triggers an audible alert via a buzzer. This project not only demonstrates the use of ultrasonic technology for proximity sensing but also validates the functionality of new hardware components after troubleshooting earlier failures.

Project Overview

  • Objective: Create a reliable object detection system using ultrasonic waves.
  • Core Components: Arduino UNO, HC-SR04 sensor, active/passive buzzer, and jumper wires.
  • Applications: Parking assistance, home security, robotics, and industrial measurement.

Methodology & Components

We used an ultrasonic detection methodology combined with real-time audio feedback.

Hardware Components:

Circuit Diagram
Below is the wiring setup used in the project:

Arduino Code

Here’s the complete code uploaded to the Arduino IDE:

void setup() { // Define pin modes pinMode(trig, OUTPUT); pinMode(echo, INPUT); pinMode(buzzer, OUTPUT); } void loop() { long duration, distance; // Clear the trigger pin digitalWrite(trig, LOW); delayMicroseconds(2); // Send a 10µs pulse to trigger digitalWrite(trig, HIGH); delayMicroseconds(10); digitalWrite(trig, LOW); // Read the echo pin and calculate pulse duration duration = pulseIn(echo, HIGH); // Calculate distance in cm distance = (duration / 2) * 0.0343; // If an object is detected within 10 cm, activate the buzzer if (distance < 10) { tone(buzzer, 4000); // Emit 4000 Hz tone delay(1000); } else { noTone(buzzer); // Turn off buzzer } }
Enter fullscreen mode Exit fullscreen mode

Key Functionalities Explained

Ultrasonic Detection: The HC-SR04 emits an ultrasonic pulse and measures the time taken for the echo to return.

Distance Calculation: Distance is calculated using the formula:

Distance = (Duration / 2) * 0.0343
where 0.0343 is the speed of sound in centimeters per microsecond.

Alarm Trigger: If an object is detected within 10 cm, the buzzer emits a 4000 Hz tone for 1 second.

Continuous Monitoring: The system runs in a loop, providing real-time detection.

Real-World Applications

Parking Sensors: Warn drivers of nearby obstacles.

Home Security: Detect intrusions near doors or windows.

Robotics: Enable obstacle avoidance in autonomous robots.

Industrial Use: Monitor fill levels in tanks or containers.

Conclusion

This smart alarm system effectively demonstrates the use of ultrasonic sensors for object detection. It confirmed that earlier hardware issues were due to faulty components and not coding errors. The system is reliable, scalable, and ready for enhancements like wireless communication or multi-sensor integration.

Top comments (0)