Skip to main content
Electrical Engineering

Return to Question

added 9 characters in body
Source Link
Shravya Boggarapu
Shravya Boggarapu
  • 163
  • 1
  • 7

We were testing the STM32 on a custom board. We were able to program it through SWD pins and an external ST link.

Unfortunately, we didn't activate the SWD pins in the .ioc file. Now we cannot connect to it and we are not able to erase the board through ST link utility. We tried the solutions offered in this post: STM32 & ST-LINK - Cannot connect to MCU after successful programming

We have USB pins active but no code implemented for it as it was actually just a blink code.

Any suggestions as to how to reset the STM32 chip?

We were testing the STM32 on a custom board. We were able to program it through SWD pins and an external ST link.

Unfortunately we didn't activate the SWD pins in the .ioc file. Now we cannot to it and we are not able to erase the board through ST link utility. We tried the solutions offered in this post: STM32 & ST-LINK - Cannot connect to MCU after successful programming

We have USB pins active but no code implemented for it as it was actually just a blink code.

Any suggestions as to how to reset the STM32 chip?

We were testing the STM32 on a custom board. We were able to program it through SWD pins and an external ST link.

Unfortunately, we didn't activate the SWD pins in the .ioc file. Now we cannot connect to it and we are not able to erase the board through ST link utility. We tried the solutions offered in this post: STM32 & ST-LINK - Cannot connect to MCU after successful programming

We have USB pins active but no code implemented for it as it was actually just a blink code.

Any suggestions as to how to reset the STM32 chip?

Tweeted twitter.com/StackElectronix/status/1440511334718734339
Source Link
Shravya Boggarapu
Shravya Boggarapu
  • 163
  • 1
  • 7

Cannot connect to STM32 after programming without activating SWD pins

We were testing the STM32 on a custom board. We were able to program it through SWD pins and an external ST link.

Unfortunately we didn't activate the SWD pins in the .ioc file. Now we cannot to it and we are not able to erase the board through ST link utility. We tried the solutions offered in this post: STM32 & ST-LINK - Cannot connect to MCU after successful programming

We have USB pins active but no code implemented for it as it was actually just a blink code.

Any suggestions as to how to reset the STM32 chip?