Skip to main content
added 52 characters in body
Source Link
periblepsis
  • 21.3k
  • 1
  • 13
  • 41

\$R_1\$ needs to be sized so that \$I_{\small{Z}}\approx \frac{V_{\small{SRC}}-V_{\small{Z}}}{R_1}\$, where that current is specified in the datasheet for the zener. The load current will be approximately \$I_{\small{LOAD}}\approx\frac{V_{\small{Z}}-700\:\text{mV}}{R_{\small{E}}}\$. You will need to accept the fact that there will only be a compliance voltage for the load of \$\le V_{\small{SRC}}-V_{\small{Z}}\$. And \$I_{\small{LOAD}} \le 10\cdot I_{\small{Z}}\$.

\$R_1\$ needs to be sized so that \$I_{\small{Z}}\approx \frac{V_{\small{SRC}}-V_{\small{Z}}}{R_1}\$, where that current is specified in the datasheet for the zener. The load current will be approximately \$I_{\small{LOAD}}\approx\frac{V_{\small{Z}}-700\:\text{mV}}{R_{\small{E}}}\$. You will need to accept the fact that there will only be a compliance voltage for the load of \$\le V_{\small{SRC}}-V_{\small{Z}}\$.

\$R_1\$ needs to be sized so that \$I_{\small{Z}}\approx \frac{V_{\small{SRC}}-V_{\small{Z}}}{R_1}\$, where that current is specified in the datasheet for the zener. The load current will be approximately \$I_{\small{LOAD}}\approx\frac{V_{\small{Z}}-700\:\text{mV}}{R_{\small{E}}}\$. You will need to accept the fact that there will only be a compliance voltage for the load of \$\le V_{\small{SRC}}-V_{\small{Z}}\$. And \$I_{\small{LOAD}} \le 10\cdot I_{\small{Z}}\$.

Source Link
periblepsis
  • 21.3k
  • 1
  • 13
  • 41

\$R_1\$ needs to be sized so that \$I_{\small{Z}}\approx \frac{V_{\small{SRC}}-V_{\small{Z}}}{R_1}\$, where that current is specified in the datasheet for the zener. The load current will be approximately \$I_{\small{LOAD}}\approx\frac{V_{\small{Z}}-700\:\text{mV}}{R_{\small{E}}}\$. You will need to accept the fact that there will only be a compliance voltage for the load of \$\le V_{\small{SRC}}-V_{\small{Z}}\$.