Merge pull request #146 from Kasperror/patch-1

added setup instructions for sudo-less RPi usage

Author: tannewt

README.rst

@@ -110,6 +110,32 @@ need to be specified as it is computed from the supplied ``pixel_order``.
  pixel = neopixel.NeoPixel(board.D0, 1, pixel_order=neopixel.RGBW)
  pixel[0] = (30, 0, 20, 10)
 
+Setup for sudo-less usage on Raspberry Pi boards
+================================================
+1. Enable both SPI and Serial port hardware (Serial interface). Do it by ``raspi-config`` tool or manually by adding
+
+ ::
+
+ dtparam=spi=on
+ enable_uart=1
+
+ to the ``/boot/config.txt``
+
+2. Reboot the Pi to apply the changes - the hardware setup takes place during boot.
+3. Connect LED's DIN to ``GPIO10`` (physical pin 19)
+
+When initializing the ``NeoPixel`` object **always** do it with ``board.D10`` (GPIO10)
+
+.. code-block:: python
+
+ import board
+ import neopixel
+
+ DATA_PIN = board.D10
+ pixel = neopixel.NeoPixel(DATA_PIN, ...)
+
+Now you can execute the code using ``python`` without ``sudo``
+
 Documentation
 =============