Merge pull request #175 from intel-iot-devkit/ISS-3219

ISS-3219 Update readme for Ubuntu users

Author: andrey4latyshev

analog-in/README.md

@@ -22,7 +22,9 @@ This sample has been tested on
 The sample might need minor modifications depending on the board and shield you are using.
 
 ## Software requirements
-This version of the sample has been tested on Ubuntu Linux. It requires the [mraa library](https://github.com/intel-iot-devkit/mraa). 
+This version of the sample has been tested on Ubuntu Linux. It requires the [mraa library](https://github.com/intel-iot-devkit/mraa).
+
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration). 
 
 ## Setup
 Create a new project on Intel(R) System Studio using this sample. 

aws-pub-sub/cpp/README.md

@@ -16,6 +16,8 @@ No special H/W requirements, as long as your device could be connected to the in
 
 This version of the sample has been tested on Ubuntu Linux.
 
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
+
 ## Setup
 
 Refer to [this document](https://github.com/intel-iot-devkit/iot-samples-cloud-setup/blob/master/aws-mqtt.md) on how to create an AWS account and setup the AWS IoT. When the initial account setup is done, make a note of the endpoint corresponding to your account, also download the certificate files into a known folder on your target system (e.g. /etc/aws-certs).

azure-amqp/README.md

@@ -28,6 +28,8 @@ The following libraries need to be installed on your target platfrom for this sa
 
 libcurl: On your target Ubuntu system do: `apt install libcurl3`
 
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
+
 
 ## Setup
 

azure-http/README.md

@@ -28,6 +28,8 @@ The following libraries need to be installed on your target platfrom for this sa
 
 libcurl: On your target Ubuntu system do: `apt install libcurl3`
 
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
+
 
 ## Setup
 

azure-mqtt/README.md

@@ -28,6 +28,8 @@ The following libraries need to be installed on your target platfrom for this sa
 
 libcurl: On your target Ubuntu system do: `apt install libcurl3`
 
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
+
 
 ## Setup
 

bluemix-flame-detect/README.md

@@ -29,6 +29,8 @@ The following libraries need to be installed on your target platfrom for this sa
 You can build the paho mqtt library from source, or use [this link](https://www.eclipse.org/downloads/download.php?file=/paho/1.3/eclipse-paho-mqtt-c-unix-1.2.0.tar.gz) to download a pre-built library. After expanding the zipped file, copy the 'libpaho-mqtt3c.so.1' into 
 /usr/lib folder on your target system.
 
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
+
 ## Setup
 
 Refer to [this page](https://console.bluemix.net/) to get started on IBM® Bluemix™. Also see [this guide](https://github.com/intel-iot-devkit/iot-samples-cloud-setup/blob/master/bluemix-mqtt.md) for further help on initial setup.

bluemix-quickstart/README.md

@@ -29,6 +29,8 @@ The following libraries need to be installed on your target platfrom for this sa
 You can build the paho mqtt library from source, or use [this link](https://www.eclipse.org/downloads/download.php?file=/paho/1.3/eclipse-paho-mqtt-c-unix-1.2.0.tar.gz) to download a pre-built library. After expanding the zipped file, copy the 'libpaho-mqtt3c.so.1' into 
 /usr/lib folder on your target system.
 
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
+
 ## Setup
 
 Refer to [this page](https://console.bluemix.net/) to get started on IBM® Bluemix™. Also see [this guide](https://github.com/intel-iot-devkit/iot-samples-cloud-setup/blob/master/bluemix-mqtt.md) for further help on initial setup.

digital-in/README.md

@@ -25,6 +25,9 @@ The sample might need minor modifications depending on the board and shield you
 ## Software requirements
 This version of the sample has been tested on Ubuntu Linux. It requires the [mraa library](https://github.com/intel-iot-devkit/mraa). 
 
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
+
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
 ## Setup
 Create a new project on Intel(R) System Studio using this sample. 
 Connect the input device to a digital input pin on your IoT board.

digital-out/README.md

@@ -23,7 +23,9 @@ This sample has been tested on
 The sample might need minor modifications depending on the board and shield you are using.
 
 ## Software requirements
-This version of the sample has been tested on Ubuntu Linux. It requires the [mraa library](https://github.com/intel-iot-devkit/mraa). 
+This version of the sample has been tested on Ubuntu Linux. It requires the [mraa library](https://github.com/intel-iot-devkit/mraa).
+
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration). 
 
 ## Setup
 Create a new project on Intel(R) System Studio using this sample. 

google-pub/c/README.md

@@ -9,6 +9,8 @@ No special H/W requirements, as long as your device could be connected to the in
 ## Software requirements
 This version of the sample has been tested on Ubuntu Linux.
 
+This sample requires additional system configuration when using Ubuntu OS with the UP series boards. Instructions on how to install the custom provided Linux kernel with the required drivers can be [found here](https://wiki.up-community.org/Ubuntu#Ubuntu_18.04_installation_and_configuration).
+
 ## Setup
 Sign in to your Google Cloud account or open a new account if you don't already have one. You will need a personal email address, and a credit card (to verify identity).