user-v2 network

user-v2 network provides a user-mode networking similar to the default user-mode network and also provides support for vm -> vm communication.

To enable this network mode, define a network with mode: user-v2 in networks.yaml

By default, the below network configuration is already applied (Since v0.18).

... networks:  user-v2:  mode: user-v2  gateway: 192.168.104.1  netmask: 255.255.255.0 ... 

Instances can then reference these networks from their lima.yaml file:

• CLI
• YAML

limactl start --network=lima:user-v2 

networks:  - lima: user-v2 

An instance’s IP address is resolvable from another instance as lima-<NAME>.internal. (e.g., lima-default.internal.).

Note

• Enabling this network will disable the default user-mode network