Revisions to How can I check to see if I am receiving MED's?

fixed acronym tag url again (d*mn you autocomplete)

edited Jun 5, 2013 at 15:54

5k
5
38
53

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending me MED's MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending me MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending me MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

Tweeted twitter.com/#!/StackNetworkEng/status/342007750563356672

occurred Jun 4, 2013 at 19:59

restore my original meaning - my/me

Source Link

edited Jun 4, 2013 at 19:25

zevlag

642
7
15

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending myme MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending my MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending me MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

added 39 characters in body

Source Link

edited Jun 4, 2013 at 19:19

Craig Constantine

5k
5
38
53

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending me MED'smy MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending me MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

I have a BGP session with a transit provider in two different cities. We are both using the same AS at both locations. I am expecting them to be sending my MED's for me to use for routing decisions of outbound traffic. (ie. so I can send traffic to the router that is nearest my destination, other customers in the same city)

How can I verify that I am really receiving those MED's?

I have Brocade XMR's.

If I do a show ip bgp routes, I see the following:

Total number of BGP Routes: 445744 Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH S:SUPPRESSED F:FILTERED s:STALE Prefix Next Hop MED LocPrf Weight Status 2 1.0.0.0/24 4.53.x.x 0 100 0 BE AS_PATH: 3356 15169 3 1.0.4.0/22 4.53.x.x 0 100 0 BE AS_PATH: 3356 3549 6939 6939 7545 56203

Browsing through several pages of the output, the MED always shows 0. I don't want to manually check all 1/2 million routes.

Source Link

asked Jun 4, 2013 at 19:05

zevlag

642
7
15

Loading

Stack Exchange Network

Return to Question