Timeline for VLAN: No internet access
Current License: CC BY-SA 3.0
23 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 11, 2017 at 16:21 | comment | added | Ron Maupin♦ | Did any answer help you? If so, you should accept the answer so that the question doesn't keep popping up forever, looking for an answer. Alternatively, you could provide and accept your own answer. | |
| S May 14, 2015 at 17:34 | history | bounty ended | CommunityBot | ||
| S May 14, 2015 at 17:34 | history | notice removed | CommunityBot | ||
| May 12, 2015 at 19:50 | comment | added | John | Laptop via AP gets gateway of 10.0.10.1 and DNS of 8.8.8.8/8.8.4.4. | |
| May 7, 2015 at 8:23 | comment | added | generalnetworkerror | Is the laptop via the AP getting a default g/w and dns servers assigned? What are they? | |
| May 6, 2015 at 19:12 | comment | added | Ron Trunk | Lat's take this one step at a time. Plug your PC into ports 1 and 2 on the router and verify that you get the correct IP address AND you can reach the internet. The connect your switch to the ports. To make it simple, say port 1 on the switch connects to port 1 on the router, and port 2 connects to port 2.. Next, make sure VLAN 1 is untagged on port 1 and vlan 10 is untagged on port 2. In fact, all your ports on the switch should be untagged. | |
| May 6, 2015 at 18:19 | answer | added | Ronnie Smith | timeline score: 2 | |
| S May 6, 2015 at 15:36 | history | bounty started | John | ||
| S May 6, 2015 at 15:36 | history | notice added | John | Draw attention | |
| May 6, 2015 at 0:12 | comment | added | John | I set the router port 1 to VLAN1, and port 2 to VLAN10. Then what happens is that all machines on the network (wired and wireless) get an IP on the 10.0.10.x subnet and none can access internet. I even tried setting the port on the switch to where it connect to the router to T and U with no luck. | |
| May 5, 2015 at 8:05 | history | edited | Ryan Foley | CC BY-SA 3.0 | added 87 characters in body |
| May 5, 2015 at 3:56 | comment | added | John | I hadn't thought of that, but will give it a go... will update tomorrow! | |
| May 5, 2015 at 1:14 | comment | added | Ron Trunk | I'm mostly suspicious of the router/firewall. Based on a quick scan of the manual, I don't think you can set the router ports to do trunking. You may have to connect two cables to the router, one for each VLAN. Set router ports 1 and 2 to VLANs 1 and 10, respectively. | |
| May 5, 2015 at 0:22 | comment | added | John | Added screenshots from what I can gather are all of the pages that matter... | |
| May 4, 2015 at 23:05 | history | edited | John | CC BY-SA 3.0 | added 352 characters in body |
| May 4, 2015 at 21:38 | history | edited | John | CC BY-SA 3.0 | Added screenshots |
| May 4, 2015 at 14:06 | comment | added | John | With the AP plugged into port 48, if on the switch, I set port 48's PVID to 1, I get an IP on VLAN1 and can browse the net, etc. If I revert port 48's PVID to 10, I get the problem I am describing. | |
| May 4, 2015 at 14:04 | comment | added | John | I'll upload screenshots later today. The FVS318 has an IP of 10.0.0.1 and 10.0.10.1. The switch has 10.0.0.2. If I plug in to any port but 48, I get an address of 10.0.0.x with gateway of 10.0.01, on port I get 10.0.10.x with a gateway of 10.0.10.1. When I plug in the AP, it gets an ip of 10.0.10.x with a gateway of 10.0.10.1. I have tried setting the Untagged VLAN to checked with a value of VLAN10, as well as unchecked. | |
| May 4, 2015 at 12:58 | comment | added | Ron Trunk | What is the IP address and default gateway address you get on your laptop when you are plugged into the switch? Is it the same when you are wireless? | |
| May 4, 2015 at 8:24 | review | Close votes | |||
| May 6, 2015 at 15:38 | |||||
| May 4, 2015 at 8:08 | comment | added | Mike Pennington | Please consider adding more details; we need to see your AP and switch configurations | |
| May 4, 2015 at 4:01 | review | First posts | |||
| May 4, 2015 at 17:22 | |||||
| May 4, 2015 at 4:00 | history | asked | John | CC BY-SA 3.0 |