Return to Question

Question Protected by CommunityBot

occurred Feb 7, 2022 at 7:37

Minor fixes

Source Link

edit approved Feb 2, 2016 at 8:21

Greenonline ♦

SSH into raspberry piRaspberry Pi without knowing ipIP address

I have a rspbryPIRaspberry Pi connected to Ethernet and with a Mac (though USB cable). I m

I'm trying to SSH in the piPi but I don't know the ipIP address. I have tried :

 ifconfig

but I have I can't see eth0eth0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether a8:20:66:09:f8:36 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 7c:d1:c3:d8:b5:dd inet6 fe80::7ed1:c3ff:fed8:b5dd%en1 prefixlen 64 scopeid 0x5 inet 192.168.91.16 netmask 0xffffff00 broadcast 192.168.91.255 media: autoselect status: active fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:3e:e1:ff:fe:7f:a0:82 media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0e:d1:c3:d8:b5:dd media: autoselect status: inactive

SSH into raspberry pi without knowing ip address

I have a rspbryPI connected to Ethernet and with a Mac (though USB cable). I m trying to SSH in the pi but I don't know the ip address. I have tried :

 ifconfig

but I have I can't see eth0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether a8:20:66:09:f8:36 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 7c:d1:c3:d8:b5:dd inet6 fe80::7ed1:c3ff:fed8:b5dd%en1 prefixlen 64 scopeid 0x5 inet 192.168.91.16 netmask 0xffffff00 broadcast 192.168.91.255 media: autoselect status: active fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:3e:e1:ff:fe:7f:a0:82 media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0e:d1:c3:d8:b5:dd media: autoselect status: inactive

SSH into Raspberry Pi without knowing IP address

I have a Raspberry Pi connected to Ethernet and with a Mac (though USB cable).

I'm trying to SSH in the Pi but I don't know the IP address. I have tried :

 ifconfig

but I have I can't see eth0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether a8:20:66:09:f8:36 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 7c:d1:c3:d8:b5:dd inet6 fe80::7ed1:c3ff:fed8:b5dd%en1 prefixlen 64 scopeid 0x5 inet 192.168.91.16 netmask 0xffffff00 broadcast 192.168.91.255 media: autoselect status: active fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:3e:e1:ff:fe:7f:a0:82 media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0e:d1:c3:d8:b5:dd media: autoselect status: inactive

Tweeted twitter.com/#!/StackRaspi/status/415297233660440577

occurred Dec 24, 2013 at 1:45

added 1156 characters in body

Source Link

edited Dec 23, 2013 at 16:31

Alex Garulli

I have a rspbryPI connected to Ethernet and with a Mac (though USB cable). I m trying to SSH in the pi but I don't know the ip address. I have tried :

 ifconfig

but I have I can't see eth0.

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether a8:20:66:09:f8:36 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 7c:d1:c3:d8:b5:dd inet6 fe80::7ed1:c3ff:fed8:b5dd%en1 prefixlen 64 scopeid 0x5 inet 192.168.91.16 netmask 0xffffff00 broadcast 192.168.91.255 media: autoselect status: active fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:3e:e1:ff:fe:7f:a0:82 media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0e:d1:c3:d8:b5:dd media: autoselect status: inactive

I have a rspbryPI connected to Ethernet and with a Mac (though USB cable). I m trying to SSH in the pi but I don't know the ip address. I have tried :

 ifconfig

but I have I can't see eth0.

I have a rspbryPI connected to Ethernet and with a Mac (though USB cable). I m trying to SSH in the pi but I don't know the ip address. I have tried :

 ifconfig

but I have I can't see eth0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether a8:20:66:09:f8:36 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 7c:d1:c3:d8:b5:dd inet6 fe80::7ed1:c3ff:fed8:b5dd%en1 prefixlen 64 scopeid 0x5 inet 192.168.91.16 netmask 0xffffff00 broadcast 192.168.91.255 media: autoselect status: active fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:3e:e1:ff:fe:7f:a0:82 media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0e:d1:c3:d8:b5:dd media: autoselect status: inactive

Source Link

asked Dec 23, 2013 at 15:30

Alex Garulli

SSH into raspberry pi without knowing ip address

I have a rspbryPI connected to Ethernet and with a Mac (though USB cable). I m trying to SSH in the pi but I don't know the ip address. I have tried :

 ifconfig

but I have I can't see eth0.

ssh