MINI PROJECT PRESENTATION KEE 354 SUBMITTED BY: LALIT KAPOOR 1873520033 2ND YEAR-EE SUBMITTED TO: MR.MAYANK KUMAR MR.SUNEEL KUMAR 1
This is a presentation on bluetooth based home automation using arduino. 27-07-2021 2
CONTENTS  Introduction  Hardware Requirements  Software Used  Block Diagram  Advantages  Cost Analysis  References 27-07-2021 3
INTRODUCTION  To develop a Bluetooth based home automation system with Arduino UNO Board and an Android application.  Remote controlled home automation system provides a simpler solution with Android application technology.  Remote operation is achieved by any smartphone/Tablet etc., with Android OS, upon a GUI (Graphical User Interface) based touch screen operation. 27-07-2021 4
Hardware Requirements  Arduino UNO  Bluetooth Module – HC-05  5 V Relay  Relay Driver- ULN2003  Power Supply 27-07-2021 5
Arduino UNO  The Arduino UNO is a microcontroller board based on the ATmega328P.  It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button  Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. 27-07-2021 6
The Board…… 27-07-2021 7
Technical Specifications  Microcontroller ----->ATmega328  Operating Voltage ----->5V  Input Voltage (recommended)-----> 7-12V  Input Voltage (limits)-----> 6-20V  Digital I/O Pins ----->14 (of which 6 provide PWM output)  Analog Input Pins-----> 6  DC Current per I/O Pin----->40 mA  DC Current for 3.3V Pin ----->50 mA  Flash Memory 32 KB of which 0.5 KB used by bootloader  SRAM----> 2 KB  EEPROM ----->1 KB  Clock Speed ----->16 MHz 27-07-2021 8
Bluetooth Module HC-05  For the communication between mobile phone and microcontroller Bluetooth module(HC-05) is used.  HC-05 is low power 1.8V operation and is easy to use with Bluetooth SPP (serial port protocol).  Serial port Bluetooth module have a Bluetooth 2.0+EDR (enhanced data rate), 3Mbps modulation with complete 2.4GHZ radio transceiver and baseband. 27-07-2021 9
Relay  Relay is basically an electromagnetic switch which can be turn on and off by an applying the voltage across its contacts.  In this project we used a 5V 2-channel relay. 27-07-2021 10
How Relay Works? 27-07-2021 11
Relay Driver  Relay is safely driven by ULN2003 IC.  Protect microcontroller from relay kick back using integrated clamping diodes.  Has 7 high current Darlington arrays each containing 7 open collector Darlington pairs with common emitters 27-07-2021 12
Powrer Supply 27-07-2021 13
Software Used for Bluetooth Control  The Android platform includes support for the Bluetooth network stack, which allows a device to wirelessly exchange data with other Bluetooth devices.  The application framework provides access to the Bluetooth functionality through the Android Bluetooth APIs.  Control home electrical system using smart phone with android application and Blue Switch Module.  Blue Switch Module’s outputs to directly drive loads like bulbs, Lamps, Sockets, Television, Fans etc.  For download and installation many apps are available on Google Playstore. 27-07-2021 14
Contd… 27-07-2021 15
Software used for Arduino Programming  Arduino IDE.  Programming language used is embedded C/C++. 27-07-2021 16
Block Diagram 27-07-2021 17
Advantages  It is a robust and easy to use system.  There is no need for extra training of that person who is using it.  All the control would be in your hands by using this home automation system.  This project can provide the facility of monitoring all the appliances with in the communication range through Bluetooth.  The schematic of Arduino is open source, for the future enhancement of the project board can be extended to add more hardware features 27-07-2021 18
Cost Analysis Hardware Price in Rs.(approx.) Arduino Uno 350 Relay Driver 70 Relay 200 Power Supply Unit 200 Jumper Wires 100 Total 920 27-07-2021 19
References  www.electronicsforu.com  www.pantechsolutions.net  https://harshsharmatechnicals.com/2018/01/3 0/code-and-circuit-diagram-for-home- automation-system-using-arduino/  Images from Google Images 27-07-2021 20
Thank You 27-07-2021 21

Bluetooth based home automation using arduino presentaton

  • 1.
    MINI PROJECT PRESENTATION KEE 354 SUBMITTEDBY: LALIT KAPOOR 1873520033 2ND YEAR-EE SUBMITTED TO: MR.MAYANK KUMAR MR.SUNEEL KUMAR 1
  • 2.
    This is apresentation on bluetooth based home automation using arduino. 27-07-2021 2
  • 3.
    CONTENTS  Introduction  HardwareRequirements  Software Used  Block Diagram  Advantages  Cost Analysis  References 27-07-2021 3
  • 4.
    INTRODUCTION  To developa Bluetooth based home automation system with Arduino UNO Board and an Android application.  Remote controlled home automation system provides a simpler solution with Android application technology.  Remote operation is achieved by any smartphone/Tablet etc., with Android OS, upon a GUI (Graphical User Interface) based touch screen operation. 27-07-2021 4
  • 5.
    Hardware Requirements  ArduinoUNO  Bluetooth Module – HC-05  5 V Relay  Relay Driver- ULN2003  Power Supply 27-07-2021 5
  • 6.
    Arduino UNO  TheArduino UNO is a microcontroller board based on the ATmega328P.  It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button  Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. 27-07-2021 6
  • 7.
  • 8.
    Technical Specifications  Microcontroller----->ATmega328  Operating Voltage ----->5V  Input Voltage (recommended)-----> 7-12V  Input Voltage (limits)-----> 6-20V  Digital I/O Pins ----->14 (of which 6 provide PWM output)  Analog Input Pins-----> 6  DC Current per I/O Pin----->40 mA  DC Current for 3.3V Pin ----->50 mA  Flash Memory 32 KB of which 0.5 KB used by bootloader  SRAM----> 2 KB  EEPROM ----->1 KB  Clock Speed ----->16 MHz 27-07-2021 8
  • 9.
    Bluetooth Module HC-05 For the communication between mobile phone and microcontroller Bluetooth module(HC-05) is used.  HC-05 is low power 1.8V operation and is easy to use with Bluetooth SPP (serial port protocol).  Serial port Bluetooth module have a Bluetooth 2.0+EDR (enhanced data rate), 3Mbps modulation with complete 2.4GHZ radio transceiver and baseband. 27-07-2021 9
  • 10.
    Relay  Relay isbasically an electromagnetic switch which can be turn on and off by an applying the voltage across its contacts.  In this project we used a 5V 2-channel relay. 27-07-2021 10
  • 11.
  • 12.
    Relay Driver  Relayis safely driven by ULN2003 IC.  Protect microcontroller from relay kick back using integrated clamping diodes.  Has 7 high current Darlington arrays each containing 7 open collector Darlington pairs with common emitters 27-07-2021 12
  • 13.
  • 14.
    Software Used forBluetooth Control  The Android platform includes support for the Bluetooth network stack, which allows a device to wirelessly exchange data with other Bluetooth devices.  The application framework provides access to the Bluetooth functionality through the Android Bluetooth APIs.  Control home electrical system using smart phone with android application and Blue Switch Module.  Blue Switch Module’s outputs to directly drive loads like bulbs, Lamps, Sockets, Television, Fans etc.  For download and installation many apps are available on Google Playstore. 27-07-2021 14
  • 15.
  • 16.
    Software used forArduino Programming  Arduino IDE.  Programming language used is embedded C/C++. 27-07-2021 16
  • 17.
  • 18.
    Advantages  It isa robust and easy to use system.  There is no need for extra training of that person who is using it.  All the control would be in your hands by using this home automation system.  This project can provide the facility of monitoring all the appliances with in the communication range through Bluetooth.  The schematic of Arduino is open source, for the future enhancement of the project board can be extended to add more hardware features 27-07-2021 18
  • 19.
    Cost Analysis Hardware Pricein Rs.(approx.) Arduino Uno 350 Relay Driver 70 Relay 200 Power Supply Unit 200 Jumper Wires 100 Total 920 27-07-2021 19
  • 20.
    References  www.electronicsforu.com  www.pantechsolutions.net https://harshsharmatechnicals.com/2018/01/3 0/code-and-circuit-diagram-for-home- automation-system-using-arduino/  Images from Google Images 27-07-2021 20
  • 21.