if you use IntelliJ IDEA, adding the spring-boot-devtools is not enough. This is because unlike Eclipse, you need to explicitly tell IntelliJ IDEA to “Make The Project” for it to build to the target classpath.

see on youtube

The easiest solution: run app debug mode and press Ctrl + f9 (short-cut for build)

or

1. You need to enable the “Make project automatically” option. You can find it in Settings – Build, Execution, Deployment – Compiler
2. To open the registry, Press Ctrl-Alt-Shift-/ and select "Registry" from the menu that appears, enable the “compiler.automake.allow.when.app.running” check-box.

To solve this You can do like:

1. Add LiveReload extension in your browser.
2. Add devtools dependencies to your pom.xml(if it's maven (spring-boot-devtools)).
3. In your intellij IDEA go to: file->settings->build,execution,deployment. Go to ->compiler->build project automatically.
4. In your intellij IDEA: SHIFT+Ctrl+A ->registry-> compiler.automake.allow.when.app.running

In IntelliJ 2021.2 compiler.automake.allow.when.app.running option dissappeared. This option was moved to Advanced settings:

LiveReload and restart are different features. Livereload allows you to detect changes in resources/static folder and notify browser that files changed and the page should be reloaded.

Your question describes Restart scenario. If you want your application to reload automatically on *.class-files changes, make sure your IDE outoputs compiled classes to:

build\classes\main 

In Intellij go to Project Structure (Ctrl+Alt+Shift+S) and setup project compiler output dir. After this you can make changes in your classes and press Ctrl+Shift+F9 to recompile current class or hit Ctrl+F9 to recompile the whole project. Spring Boot Devtools will detect changes in build\classes\main and perform restart of your application automatically.

If you want to enable LiveReload for your static assets add the following (otherwise you won't see cahnges of static content while executing bootRun goal):

bootRun { addResources = true } 

Follow below simple steps, you will be up and running in less than 2 minutes.

1. Press Ctrl+Shift+A
2. Search for Registry ...
3. scroll and find "compiler.automake.allow.when.app.running" then select the checkbox to make it active.
4. Click close
5. File Menu -> settings ...
6. Expand Build, Execution, Deployment
7. Select Compiler
8. Select checkbox Build project automatically
9. Apply
10. Click Ok

Now stop your application server and then start your application, that's it you will find automatic restart/reload activated when any changes are detected in the project.

Happy Coding/Hacking.

From the documentation here

As DevTools monitors classpath resources, the only way to trigger a restart is to update the classpath. The way in which you cause the classpath to be updated depends on the IDE that you are using. In Eclipse, saving a modified file will cause the classpath to be updated and trigger a restart. In IntelliJ IDEA, building the project (Build → Make Project) will have the same effect.

Live reload is a different feature than the problem you have asked the solution for. In your case as you want to reload your classes after changing them, you need to follow the following 3 steps-

1. Make change in compiler settings
2. Make changes in the registry
3. Make changes in the run/debug configuration

That's it! After modifying your classes, you can simply press ctrl+F10 to reload the modified classes. You are good to go then!

Addtionally, if you want to configure single point of reload upon modification: https://www.logicbig.com/tutorials/spring-framework/spring-boot/trigger-file.html

For Live Reload: When a Spring Boot application is running in Intellij IDEA, the templates are served from out/production/resources/templates directory. You can change this behavior and serve the templates directly from src/main/resources/templates directory in development mode. Create a file application-dev.yml in src/main/resources directory and paste the following code snippet in it:

spring: # Templates reloading during development thymeleaf: prefix: file:src/main/resources/templates/ cache: false # Static resources reloading during development resources: static-locations: file:src/main/resources/static/ cache-period: 0 

To load the above properties, you need to activate and set the default Spring Boot profile to dev. Add the following property to your application.yml file:

spring: profiles: active: dev 

Start your application. Now whenever you make any changes in your html files, all you need is to refresh the browser to see the changes!

Before anything you need to know devtools is reloading pretty much everything under src/main/ path not the changing to pom.xml file.

1- Add Spring Boot devtools dependency to your maven pom.xml file.

<dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-devtools</artifactId> <version>your-desired-version</version> </dependency> 

2- Restart the project and reload maven.

3- Add live reload extension for your browser from http://livereload.com/extensions/

4- On IntelliJ idea 2021+ under File->Setting->Build, Execution, Deployment->Compiler: check build project automatically

5- On IntelliJ idea 2021+ under File->Setting->Advance Setting: check allow auto-make to start even if developed application is currently running

6- change something under src/main (it could be java code, template, or anything else) other than method signature, parameters, or something like this. For example, change a simple line of your code or change a String literal or some stylesheet in the template.

4- You can skip lines (3-4-5-6) and rebuild the current file by Ctrt+shift+f9 or rebuild the whole project by Ctrl_f9 or if you did the preceding lines and you don't want to even press Ctrt+shift+f9, you don't need to rebuild just enjoy the result on the browser.

5- Enjoy the result on the browser.

intellij 2021.2 has moved this option to AdvancedSettings:

For me,

I update to the latest version and in File -> Setting > Advance setting and check

To answer the above question let us first understand a feature in Intellij Idea. You must have seen that the file that you make change need not be saved. And the change that you make in any non .class file remains saved. To cross verify please make some change to the .java file(you can choose any other file as well) and close it and it won't prompt for Saving it and when you reopen the file then your changes are still there. But if you check the .class file the changes made are not reflected which is obvious because build has not happened. On the contrary when we enable automatic build in Eclipse it is done on an event and the event is Saving the File -> Ctrl+S(Windows). But in intellij idea that event is not happening or we do not carry out that event. So, consider the scenario when we do not have spring-boot-devtool then, in that case, we always had to rebuild or restart the server to pick up the changes thereby causing an event. Now, regarding spring-boot-devtool as Ankush92 rightly mentioned that devtool monitors the classpath changes and restart happens only if there is any change in the classpath. But as I explained earlier we are just adding our code changes in the non .class file and expecting devtool to trigger a restart even when that change is not reflected in the class path. Let me mention this again that in eclipse the event to do the same is Saving the File(Ctrl+S) when automatic build is enabled. So, now the question is how to have a workaround and mimic what Ctrl+S does in Eclipse into the Intellij Idea. It's quite simple lets build the application and the shortcut for that is Ctrl+F9. This will trigger the same effect in intellij as Ctrl+S(in this scenario) in eclipse and help the devtool to find the change in the classpath thereby encouraging it to restart the server. So everytime you make any change in the file and want the server to restart just press Ctr+F9. I hope this explanation and the workaround helps.

I am using IntelliJ IDEA 2024.1.4 (Ultimate Edition) for macOS.

I followed these steps,

Simply add the dependency to your pom.xml file.

<dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-devtools</artifactId> </dependency> 

Be sure to reload the Maven changes. This small icon is in a position that's easy to overlook.

IntelliJ Community Edition does not support DevTools by default. We have to make some additional configurations:

1. Select: IntelliJ IDEA | Settings | Build, Execution, Deployment | Compiler

Check box: Build project automatically

2. Select: IntelliJ IDEA | Settings | Advanced Settings

Check box: Allow auto-make to ...

Once these two setups are complete, IntelliJ Community Edition will be able to work with Spring Boot Dev Tools.

Edit - Macros - Start Macro Recording File - Save All Build - Build Project Edit - Macros - Stop Macro Recording - You can save the macro name as “Save & Make Project” Preferences - Keymap - Macros 

Go down to expand the macros directory to find your newly macro (i.e. “Save & Make Project”). Double click to Add Keyboard Shortcut and press Cmd+S if you use Mac and Ctrl+S if you use Windows.

Intellij will prompt saying that Ctrl+S already exist just click 'Replace'.

Now all set and Ctrl+S should trigger Spring-Boot Devtools

Reference: https://tomyjaya.github.io/2016/10/08/spring-boot-dev-tools-in-intellij/

In IntelliJ IDEA 2021.2, compiler.automake.allow.when.app.running option is disappeared.

So follow these steps,

1. File ⇒ Settings ⇒ Build, Execution, Deployment ⇒ Compiler ⇒ Build project automatically
2. Advanced Settings ⇒ Allow auto-make to start even if developed application is currently running
3. Add this line to the application.properties file ⇒ spring.devtools.restart.enabled=true

I am using IntelliJ idea 2021.2.2(ultimate edition).

I followed these steps,

File -> Settings -> Build, Execution, Deployment-> Compiler add tick to Build project automatically checkbox

Next, Press Ctrl+Shift+A Search for Registry ... scroll and find "compiler.automake.allow.when.app.running" then I can't find that.

then I reserch about that I find In IntelliJ 2021.2 compiler.automake.allow.when.app.running option dissappeared. This option was moved to Advanced settings:

Advanced settings

== NEW VERSION OF INTELLIJ IDEA (2023.1.5) ==

1. ######## Add the dependency

 <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-devtools</artifactId> <scope>runtime</scope> <optional>true</optional> </dependency> 

2. ######## Setting 1

3. ######## Setting 2

I discovered that IntelliJ wasn't even using my Gradle configuration.

Visiting Build, Execution, Deployment > Build Tools > Gradle then under Delegate Settings I selected Build and Run Using and made it Gradle.

Working like a charm

For reference, here is my build configuration:

plugins { id 'org.springframework.boot' version '2.1.6.RELEASE' id 'java' id 'idea' } apply plugin: 'io.spring.dependency-management' group = 'test' version = '0.0.1' sourceCompatibility = '1.8' repositories { mavenCentral() } configurations { developmentOnly runtimeClasspath { extendsFrom developmentOnly } } dependencies { implementation 'org.springframework.boot:spring-boot-starter-web' developmentOnly 'org.springframework.boot:spring-boot-devtools' } 

This works well instead of:

bootRun { addResources = true // Did not work for me } 

apply the following steps:

1. Add LiveReload extension in your browser. link: https://chrome.google.com/webstore/detail/livereload/jnihajbhpnppcggbcgedagnkighmdlei

2. Add devtools dependencies to your pom.xml(for maven) or build.gradle (for gradle)

for maven:

 <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-devtools</artifactId> <scope>runtime</scope> <optional>true</optional> </dependency> 

for gradle

 compileOnly("org.springframework.boot:spring-boot-devtools") 

3. file->settings->build,execution,deployment. Go to ->compiler->build project automatically.

4. Ctrl+Shift+A ->registry-> compiler.automake.allow.when.app.running

5. Ctrl+Shift+A ->Edit Configurations->Spring Boot->your application ->

I've been facing this problem a lot on last months on my MAC. Even when following these steps listed here like checking "Make Project Automatically" and "Compiler Automake".

However at my Job, where we use Windows, it works perfectly when I do follow these steps.

The solution for this problem on a MAC I found though is to add a new Run Configuration (Press ⌃⌥R, then press 0) then add a new Maven configuration. On the "Command line" input set "spring-boot:run". Press "Apply" and "Ok" and run the project by selecting the new configuration created.

Of course you could just open a new terminal and just type "mvn spring-boot:run" it will work too.

This worked for me. Add the below line in application.properties file,

 spring.devtools.restart.enabled=true 

If LiveReload worked for you in the past and then suddenly stops working, and if the other proposed solutions don't work, try uninstalling and reinstalling the LiveReload Browser Plugin. That's what finally fixed it for me.

After finishing all the settings above, you should recompile the html file that you want to reload!
Build → Recompile 'yourHtmlFile.html' (Ctrl+Shift+F9 in Windows)

File -> Settings -> Build, Execution, Deployment-> Compiler add tick to Build project automatically checkbox

Ctrl+ Shift+alt+/ -> Select registry add tick to compiler.automate.allow.when.app.running

IntelliJ IDEA > preferences > Tools > Advance Settings > Compiler > check the box to allow auto-make to start even if developed application is currently running.

Add the following dependency on the appropriate pom.xml.

<dependencies> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-devtools</artifactId> <optional>true</optional> </dependency> </dependencies> 

Make the changes that you want to make while the server is running.

Build > Build Project

Reload the browser

If its Maven and you want dev-tools then check if in your pom.xml, the dependency has been imported by Intelli J properly. In my case it was showing in red so I did a Maven refresh and that resolved my issue after following other suggestions of Registry from other comments.

Step 1 : Open setting Step 2 :

Build execution development Apply and save Step 3: Restart.

Springboot devtools liveload is not working in intelliJ:

Follow below 3 steps :

1. Add devtools dependency in pom.xml

2. Go to : File/Settings/Advanced Settings/ Check Allow auto-make to start

3. Go to : File/Settings/Build,Execution,Deployment/Compiler/ - Check Build Project Automatically.