This is a simple project on Agriculture monitoring system using IoT and cloud platform. As mentioned above we have decided to develop IoT based smart agriculture systems..Here we have used an array of low power consuming sensors which are able to sense accurate environmental factors like temperature ,humidity as well as the soil health. As a small agricultural farm may be harvesting two or more crops at a time in two or more crop fields, the sensors will be located at each of the fields.(for eg –suppose one farm is having an area which is divided into two parts ,out of which one part of the land is being used for producing paddy while the other part is used for producing some other crop then the sensors (LIKE SOIL MOISTURE AND pH sensors)will be used at each parts of the land ) ..The sensors will be connected to a low power operated micro controller capable of receiving and sending data wirelessly to the cloud. The data collected by the sensors will be directly uploaded in the cloud from where it can be retrived for further processing. At the farm end there will be another micro controller which will be the main controlling unit of the whole unit. For each of the crops harvested there will be some optimum value of the parameters such as that of temp.soil which will be pre-fed into the main control unit. The data retrived from the cloud will be compared with optimum levels set for each crop and if the data collected deviate beyond certain limit from optimum value the system will initiate control actions such as turn on the motor or notify the user of increasing or decreasing pH level of the soil etc. At the user end there will an web based apllicattion through which the use rcan interact with the system . Through the web app the user can set the optimum values for the crops and check the status of the system such as get the real time paramters whenever required . Also when one part of the field is not being used for any production the user can shut down the sensors of those parts of the field which will be help ful in power saving. Also there will be a water consumption measuring system where. Through the web application the user will fix the amount of water to be used for each field.if the amount water consumed exceeds the defined value then the user will receive a notification.(Amount of water consumption may increase due to decreasing water holding capacity of the soil ).this will help the user to analyse the soil condition and take necessary actions.(This will also help to determine the motor working contions)