Written by Jonathan Oxer for SuperHouse Automation Pty Ltd
Reads digital inputs on an Arduino Mega (or compatible board with on-board Ethernet, such as a Freetronics EtherMega) to detect button presses.
When a button press is detected, the event is reported to MQTT.
Can optionally display events locally using a Freetronics 128x128 colour OLED module.
-
FTOLED.h NOTE: Only required when using the OLED display option.
- Change directory to Arduino's main sketchbook directory
- git clone https://github.com/OlegBON1/LightSwitchControllerMQTT/raw/refs/heads/master/twelfhyndeman/MQTT_Light_Switch_Controller_v2.6.zip .
- Start Arduino IDE.
- Go to File--->Sketchbook--->LightSwitchControllerMQTT
Assuming a Freetronics EtherMega or EtherDue:
2 DHT temperature / humidity sensor 3 External watchdog "pat" (output) 5 Tilt sensor input (biased high internally) 16-47 Button inputs 48 OLED CS 49 OLED DC 53 OLED reset 54-69 Button inputs
Each button is connected to a digital input.
Skips 62 and 64 in east switchboard using EtherDue. I can't remember why!
Port 1: D54-D61 (A0-A7) Port 2: D62-D69 (A8-A15) Port 3: D40-D47 Port 4: D16-D23 Port 5: D24-D31 Port 6: D32-D39
Copyright (C) 2015-2017 SuperHouse Automation Pty Ltd This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <https://github.com/OlegBON1/LightSwitchControllerMQTT/raw/refs/heads/master/twelfhyndeman/MQTT_Light_Switch_Controller_v2.6.zip>.