$ ./nmap-parse-output scan.xml html > scan.html 

$ ./nmap-parse-output scan.xml http-ports http://192.168.0.1:8081 https://192.168.0.1:8443 

$ ./nmap-parse-output scan.xml service-names http https http-proxy ms-wbt-server smtp $ ./nmap-parse-output scan.xml service http-proxy 192.168.0.24:8085 192.168.0.25:9000 

$ ./nmap-parse-output scan.xml exclude '192.168.1.1,192.168.1.20' | nmap-parse-output - ports 22,80,443,8080 

$ ./nmap-parse-output scan-all.xml include $(./nmap-parse-output.sh scan-subnet.xml hosts | tr "\n" ",") > filtered-scan.xml 

$ ./nmap-parse-output scan.xml comment-ports '8080,10.0.20.4:443' 'this port should be filtered' | ./nmap-parse-output - mark-ports '8080,10.0.20.4:443' red | ./nmap-parse-output - comment-hosts '10.0.20.1' 'look further into this host' | ./nmap-parse-output - html > test.html 

$ ./nmap-parse-output scan-after.xml exclude-ports $(./nmap-parse-output.sh scan-before.xml host-ports | tr "\n" ",") > filtered-scan.xml 

 Usage: ./nmap-parse-output [options]... <nmap-xml-output> <command> [command-parameters]... Converts/manipulates/extracts data from nmap scan XML output. Options: -u, --unfinished-scan try to read an unfinished scan output Extract Data Commands: all-hosts Generates a line break separated list of all hosts. Can be used to perform an additional scan on this hosts. Can be useful to generate a list of IPs for masscan with nmap (masscan has a more limited support for IP lists): nmap -Pn -n -sL -iL input.lst -oX all-ips.xml; nmap-parse-output all-ips.xml all-hosts banner [service-name] Extracts a list of all ports with a specific service (e.g. http, ms-wbt-server, smtp) in host:port format. Note: This command is intended for the masscan XML output only. blocked-ports Extracts all ports in host:port format, which either admin-prohibited or tcpwrapped. host-ports-protocol Extracts a list of all *open* ports in host:port format and marks the protocol type (tcp, udp) host-ports Extracts a list of all *open* ports in host:port format. hosts-to-port [port] Extracts a list of all hosts that have the given port open in 'host (hostname)' format. hosts Generates a line break separated list of all hosts with open ports. Can be used to perform an additional scan on this hosts. http-ports Generates a line separated list of HTTP(s) all ports. Currently, the following services are detected as HTTP: http, https, http-alt, https-alt, http-proxy, sip, rtsp (potentially incomplete) http-title Extracts a list of HTTP HTML titles in the following format: host:port	HTML title nmap-cmdline Shows the parameters passed to nmap of the runned scan port-info [port] Extracts a list of extra information about the given port in the following format: port;service name;http title ports-reachable Generates a comma-separated list of all reachable ports (open and closed, unfiltered). Can be used to verify if ports reachable from another host or generate port lists for specific environments. ports Generates a comma-separated list of all open ports. Can be used to verify if open ports reachable from another host or generate port lists for specific environments. Closed/filtered ports are not shown in the list. product Extracts all detected product names. service-names Extracts all detected service names (on open ports). service [service-name] Extracts a list of all *open* ports with a specific service (e.g. http, ms-wbt-server, smtp) in host:port format. show-comments Shows comments added by the comment-* commands. ssl-common-name Extracts a list of TLS/SSL ports with the commonName and Subject Alternative Name in the following format: host:port	commonName	X509v3 Subject Alternative Name tls-ports Extracts a list of all TLS ports in host:port format. Works only after a script scan. Can be used to do a testssl.sh scan. Example testssl.sh command (generates a text and HTML report for each host): for f in `cat ~/ssl-hosts.txt`; do ./testssl.sh --logfile ~/testssl.sh-results/$f.log --htmlfile ~/testssl.sh-results/$f.html $f; done Manipulate Scan Commands: comment-hosts [hosts] [comment] Comments a list of hosts in scan result. Expects a comma-separated list as input. The comment will be displayed in the HTML report. Example: nmap-parse-output scan.xml comment-hosts '10.0.0.1,192.168.10.1' 'allowed services' | nmap-parse-output - html &gt; report.html You can comment hosts from another scan, too: nmap-parse-output scan.xml comment-hosts $(./nmap-parse-output.sh scan-subnet.xml hosts | tr "\n" ",") 'this host was scanned in subnet, too.' comment-ports [ports] [comment] Comments a list of ports or hosts with port (in address:port format) in scan result. Expects a comma-separated list as input. The comment will be displayed in the HTML report. Example: nmap-parse-output scan.xml comment-ports '80,10.0.0.1:8080' 'allowed services' | nmap-parse-output - html &gt; report.html You can comment services, too: nmap-parse-output scan.xml comment-ports $(./nmap-parse-output.sh scan.xml service http | tr "\n" ",") 'this is a http port' exclude-ports [ports] Excludes a list of ports or ports of a specific host (in address:port format) from a scan result. Expects a comma-separated list as input. You can pipe the output, for instance: nmap-parse-output scan.xml exclude '80,443,192.168.0.2:80' | nmap-parse-output - service-names exclude [hosts] Excludes a list of hosts from scan result by its IP address. Expects a comma-separated list as input. You can pipe the output, for instance: nmap-parse-output scan.xml exclude '192.168.1.1,192.168.1.20' | nmap-parse-output - service-names include-ports [ports] Filter a scan by a list of ports or ports of a specific host (in address:port format) so that only the specified ports are in the output. Expects a comma-separated list as input. You can pipe the output, for instance: nmap-parse-output scan.xml include-ports '80,443,192.168.0.2:8080' | nmap-parse-output - http-title include [hosts] Filter a scan by a list of hosts so that only the specified hosts are in the output. Filter a list of hosts from scan result by its IP address. Expects a comma-separated list as input. You can pipe the output, for instance: nmap-parse-output scan.xml include '192.168.1.1,192.168.1.20' | nmap-parse-output - service-names mark-ports [ports] [color] Marks a list of ports or hosts with port (in address:port format) with the given color in scan result. Expects a comma-separated list as input. The comment will be displayed in the HTML report. Example: nmap-parse-output scan.xml mark-ports '80,10.0.0.1:8080' red | nmap-parse-output - html &gt; report.html reachable Removes all hosts where all ports a filtered. Can be used to generate a smaller HTML report. Example usage to generate HTML report: nmap-parse-output scan.xml reachable | nmap-parse-output - html &gt; scan.html Convert Scan Commands: html-bootstrap Converts the XML output into a fancy HTML report based on Bootstrap. Note: This HTML report requests JS/CSS libs from CDNs. However, the generated file uses the no-referrer meta tag and subresource integrity to protect the confidentiality. html Converts a XML output into a HTML report to-json Converts a nmap scan output to JSON Misc Commands: [v1.4.5] 

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:npo="http://xmlns.sven.to/npo"> <npo:comment> <!-- Added documentation here --> </npo:comment> <npo:category>extract</npo:category> <npo:post-processor>sort | uniq</npo:post-processor> <xsl:output method="text" /> <xsl:strip-space elements="*" /> <xsl:template match="/nmaprun/host/ports/port"> <!-- add your template here --> <xsl:if test="state/@state = $param1"> <xsl:value-of select="../../address/@addr"/> <xsl:text>, </xsl:text> </xsl:if> </xsl:template> <xsl:template match="text()" /> </xsl:stylesheet> 

 git clone https://github.com/ernw/nmap-parse-output.git cd nmap-parse-output ./nmap-parse-output 

 export PATH="$PATH:$PATH_TO_YOUR_NMAP_PARSE_OUTPUT_DIR" 

source ~/path/to/nmap-parse-output/_nmap-parse-output 

autoload bashcompinit && bashcompinit && source ~/path/to/nmap-parse-output/_nmap-parse-output