FlyEnv v4.13.6 Update Release Notes

🚀 New Features

1. Added n8n Module

You can now easily integrate n8n into your local development environment. This update allows you to install and manage
the n8n service with just a single click directly from the UI.

Thanks to @ibraimfarag for the contribution! [PR #584](https://github.com/xpf0000/Fl
yEnv/pull/584)

---

2. Enhanced OpenClaw Module

2.1 Configuration File Editor

Added a dedicated configuration file tab to the OpenClaw module. You can now view and edit configuration files directl
y within the UI, making it easier to customize your OpenClaw setup.

2.2 Quick Command Shortcuts

Added quick access shortcuts for all OpenClaw commands, streamlining your workflow and improving productivity.

---

🛠️ Improvements & Bug Fixes

3. Fixed fnm & nvm Issues

Resolved critical issues where fnm and nvm were not functioning properly. You can now use these Node version managers
seamlessly within FlyEnv.

4. General Bug Fixes & Stability

• Addressed various minor bugs and issues reported by the community to improve the overall stability and performance o
  f the application.

---

📦 Build & Transparency

All FlyEnv installation packages are built using GitHub Actions. You
can verify the build process and download the artifacts directly from the following links:

• Global Build History: GitHub Actions

---

We welcome your continued feedback and bug reports via GitHub Issues

Enjoy the update!

FlyEnv v4.13.4 Update Release Notes

🚀 New Features

1. Added OpenClaw Module

You can now easily integrate OpenClaw into your local development environment. This update allows you to install and manage the OpenClaw service with just a single click directly from the UI.

---

🛠️ Improvements & Bug Fixes

2. Fixed Linux Environment Isolation

Resolved a critical issue in the Linux version where environment isolation was failing to take effect. Your development environments on Linux will now remain strictly isolated as intended.

3. General Bug Fixes & Stability

• Addressed various minor bugs and issues reported by the community to improve the overall stability and performance of the application.

---

📦 Build & Transparency

All FlyEnv installation packages are built using [GitHub Actions](https://github.com/xpf0000/FlyEnv/actions). You can verify the build process and download the artifacts directly from the following links:

• Global Build History: [GitHub Actions](https://github.com/xpf0000/FlyEnv/actions)

---

We welcome your continued feedback and bug reports via [[GitHub Issues](https://github.com/xpf0000/FlyEnv/issues)](https://github.com/xpf0000/FlyEnv/issues)

Enjoy the update!

🚀 New Features

• Cloudflared Module - Introduced Cloudflared integration for secure tunneling capabilities

• Cloudflare Tunnel Module - Added support for managing Cloudflare Tunnels directly within FlyEnv

• Enhanced Project Creation - Python and Go modules now include new project creation features for improved developer workflow

🐛 Bug Fixes

• DNS IP Address Binding - Fixed DNS service startup issues on Windows
  • Added new bind configuration option to the DNS module settings
  • Allows specifying a custom IP address for DNS binding
  • Resolves conflicts where Windows system services occupy 0.0.0.0:53, preventing DNS from starting

1. Optimize FlyEnv Helper logic: trigger installation prompts only when necessary.

2. New Feature: Display PHP Running Status on Sites

https://www.youtube.com/watch?v=fOK4I0fk8Wg

In this video, I noticed that sometimes users are unclear whether the PHP version used by their site is running properly. Therefore, a display of the PHP running status has been added to the site interface. This allows users to clearly see whether the PHP version used by their site is currently running.

FlyEnv Update Release Notes

🚀 New Features

1. Language Support: Added Zig Module

Implemented based on the feature request by @timint.

Reference: Issue #507

2. Database Support: Added Qdrant Module

In response to numerous user requests for vector database support in FlyEnv, we have officially added the Qdrant module. Stay tuned, as more vector databases will be integrated in future updates.

---

🛠️ Improvements & Optimizations

3. Enhanced Application Update Workflow

We’ve redesigned the update process to give you full control. Previously, updates were applied without a prior preview of changes. Starting with this version, you can view the full changelog before deciding whether to proceed with the update.

4. True Portability for Windows Portable Version

We have resolved the data isolation issue in the Windows portable version. User data is now stored alongside the executable program, making FlyEnv fully portable. You can now run it directly from a USB drive or mobile hard disk without losing your settings or data.

5. Helper Improvements & System Stability

• Optimized the helper program to enhance overall system stability.
• Windows: Improved the helper installation method and fixed issues where the installation would previously fail.

---

📦 Build & Transparency

All FlyEnv installation packages are now built using GitHub Actions. You can verify the build process and download the artifacts directly from the following links:

• Global Build History: GitHub Actions
• Windows Build: [Run #21811918057](https://github.com/xpf0000/FlyEnv/actions/runs/21811918057)
• macOS Build: [Run #21799936855](https://github.com/xpf0000/FlyEnv/actions/runs/21799936855)
• Linux Build: [Run #21799936847](https://github.com/xpf0000/FlyEnv/actions/runs/21799936847)

---

We welcome your continued feedback and bug reports via [GitHub Issues](https://github.com/xpf0000/FlyEnv/issues)

Enjoy the update!

FlyEnv Update Release Notes

🚀 New Features:

1. Add Windows Visual C++ Redistributable (DLLs) required tooltips

Some Windows users encounter missing Visual C++ Redistributable (DLLs) when using PHP/MySQL/MariaDB. A prompt will now appear to advise users to download and install the Visual C++ Redistributable.

2. PHP add disable function manage

3. Fix Issues
   #518 #500

Fix the issue where Linux users fail to install Homebrew due to missing git and curl.

Fix the problem of environment variable configuration for the Linux version.

Fix the issue where the Apache rewrite module is not enabled by default.

Enjoy the update!

FlyEnv Update Release Notes

🚀 New Features:

1. GitHub OAuth Login Support
   • Users can now log in via GitHub account authorization.
   • After logging in, all licenses linked to the GitHub account will be displayed.
   • Users can independently unbind or bind UUIDs without needing to re-request licenses.

2. New Tool: Screen Capture
   • Capture the current screen or a specific window (even if it’s covered by other windows).
   • Edit screenshots with shapes, text, mosaic blur, and more.
   • High-resolution output with colors exactly matching the screen display.
   • Users can customize the screenshot shortcut keys, save location, and file naming rules.

3. New Tool: Batch Image Processing
   • Crop, compress, and add watermarks to images in batches.
   • Convert between various image formats seamlessly.
   • Supports adding textures and watermarks, with real-time previews for all adjustments.

Enjoy the update!

New Features in This Release:

1. Added PodMan Module

   • Provides quick Docker Compose setup for commonly used modules.
   • Supports exporting and importing images/containers.
   • One-click container access to execute commands directly.

2. New Multi-Language Support (Thanks to all contributors！)
   Now available in the following languages:

   • Arabic (ar): العربية
   • Azerbaijani (az): Azərbaycanca
   • Bengali (bn): বাংলা
   • German (de): Deutsch
   • English (en): English
   • Spanish (es): Español
   • French (fr): Français
   • Indonesian (id): Bahasa Indonesia
   • Italian (it): Italiano
   • Japanese (ja): 日本語
   • Portuguese (pt): Português
   • Brazilian Portuguese (pt-br): Português (Brasil)
   • Swedish (sv): Svenska
   • Turkish (tr): Türkçe
   • Ukrainian (uk): Українська
   • Vietnamese (vi): Tiếng Việt
   • Chinese (zh): 中文

Windows

1. Optimized the operational logic for the Windows version. The Windows version no longer requires administrator privileges to launch.

2. Fixed issues related to project environment configuration.

3. Resolved problems with starting and stopping PostgreSQL.

4. Improved the access speed of the phpMyAdmin page.

5. Optimize the configuration file functionality for all modules. Services will now automatically restart after configuration file changes.

macOS & Linux

1. Optimize the configuration file functionality for all modules. Services will now automatically restart after configuration file changes.

2. Fix the startup and shutdown issues of the PostgreSQL service.

Windows & macOS & Linux

1. Add Rustup module

2. Add Gradle Module

macOS & Linux

1. Add Typesense Module