Pyth, 17 + 17 = 34 bytes

BF -> Unary, 17 bytes

i+1xL"><+-.,[]"z8 

Unary -> BF, 17 bytes

s@L"><+-.,[]"tjQ8 

brainfuck, 563 335 318 316 296 + 529 373 366 336 = 632 bytes

Since this was obviously missing a solution in a related language, here is the solution in brainfuck and Golunar. I couldn't post an answer in unary, because that would need a few fantasticatillion times more memory than there are atoms in the universe ^^

The "back" routine won't check if the Golunar/Unary code is valid. If the bit count mod 3 != 1 then it will run into an endless loop printing a lot of ">"s.

Thanks to Nitrodon for helping me getting below 300 chars for the bf to unary code

brainfuck to unary

->+>>>>,[>+++[>+++++<-]>[<+<---->>-]<<--[<+>++[<<+>>>[<+>-]<[<->++[<<<+>->+>-[<->--[<<+>>>+++++++++[<----->-]<[<+>--]]]]]]]>[-]>>,]<<<<+[<+]>[>]->+[<]>+[[->+]->[->[<++>-[<++>-[<++>-[<++>-[<-------->>[-]++<-[<++>-]]]]]]<[>+<-]+>>]<<[<<]>[<]>-[[->+]->>+<[<<]>[<]]>+]>[>>]<<[+++++++[>++++++<-]>.<<<] 

Try it online!

and back

->>,[<++++++[>--------<-]+>>>>>>,]>->-<<<+[-<+]>[[->[->+<[->->+>]<[<<<]>]<+>>>[-<<+>>]<[>>>>++++++++++<<<<-]>>>]>>>+[->+]>-<+[-<+]-<[>>+[->+]-<++[-<+]-<[-]]<<<<<<[<<<<<]>>>>>>[<<]<[->>>]>>]>>>+[->+]<-<+[-[<++>-]<[<++>-]>+++[>+++++<-]>[<+<++++>>-]<<++<[>--<-[>>[<->-]<--<-[>++<-[>+<-[>--<-[>+[>+<-]>[<++>-]<+<-[>++<-]]]]]]]>.[-]>[-]<<<+] 

Try it online!

Golunar/unary-digits, 509 303 288 286 268 + 478 337 331 304 = 572 bytes

brainfuck to unary

2845581296974449674357817038179762273623136917867627972159702240227366875240878616687779429553529795902322625321040063298921498529640547483869509829184440577052825434462245755576011912505085065586076069824710351537537205287083477698633592357950165322060367940923703887 

and back

3775574485023133646619269732540391678811443648964274086227256847322821618228135493733703990523803451383315165001915937932498966394771849173263120467073642011339214182483748816052890450078070151307011943625602391238338941712116968736593594971620990210178757280976709140113340322124688909388916094040773207 

Source codes

brainfuck to unary

[ unary: ><+-.,[] 01234567 62 > 62 60 < -2 45 - 15 43 + 2 44 , 1 46 . 2 91 [ 45 93 ] 2 tape (while reading input): Left tape end marker/LTE, [binary data], input, 15, (15 multiplicator) tape (while base conversion): LTE, [binary data], Value Start/VS, [decimal digits] decimal digits: digit used/DU, value ] - set LTE >+ set leading 1 >>>>,[ while input >+++[>+++++<-] set 15 (multiplicator) >[<+<---->>-] set 15 and decrease input by 60 check for greater than set current bits = 000 (greater than) <<--[ if input != 62 try next char check for less than <+> set current bits = 001 (less than) ++[ if input != 60 try next char check for minus <<+>> set current bits = 011 (minus) >[<+>-]<[ if input != 45 try next char check for plus <-> set current bits = 010 (plus) ++[ if input != 43 try next char check for comma <<<+>->+> set current bits = 101 (comma) -[ if input != 44 try next char check for dot <-> set current bits = 100 (dot) --[ if input != 46 try next char check for left bracket <<+>> set current bits = 110 (left bracket) >+++++++++[<----->-]<[ if input != 91 go to next char use right bracket <+> set current bits = 111 (right bracket) -- decrease input by 2 / should be 0 now ]]]]]]] close all ifs >[-]>> delete 15 if still existant , input next character ] <<<<+[<+]>[>] add one to each bit and delete LTE (for shorter search routine) Start of binary to decimal routine - set value start marker (VS) >+ set digit used marker (DU) [<] go to LTE binary to decimal loop: use "double and add algorithm" to calculate the digits of the decimal value >+[ if not on VS then [->+]- restore current bit value and go to VS > go to first DU [ digit doubling loop -> remove DU and go to corresponding digit [ <++>- decrement current value and add 2 to temp value four times [ <++>- [ <++>- [ <++>- [ if value was greater than 4 then <---- ---- subtract 8 from temp >>[-]++ set next digit temp = 2 (DU plus 1) <- decrement current digit [<++>-] set temp = remaining value * 2 ] ] ] ] ] <[>+<-] set current digit = temp + set DU >> go to next digit ] end of digit doubling loop <<[<<]>[<]> go to current bit -[ if bit is 2 (used plus 1) [->+]- delete bit and go to VS >>+ increment least significant digit <[<<]>[<] go to current bit ] >+ if not on VS then repeat ] end of binary to decimal loop >[>>]< go to most significant digit <[ printing loop: for each DU print corresponding value +++++++[>++++++<-]>. add 48 to value (ASCII 0) and print <<< go to next DU ] 

and back

[ tape: left tape end marker/LTE(-1), [digits], digit end marker/DE(0), carry, SB(-1), [binary data], 60, 15 digits: digit used marker/DU(1), digit, remainder, solution, 0 else] [exit else, exit if binary data: value (, else, exit if, exit else) ] input decimal value ->> set LTE ,[ while input <++++++[>--------<-] decrease input by 48 + set DU >>>>> >, input next digit ] >->- set start of bits (SB) and first CCB <<<+[-<+]> delete LTE and go to first DU division loop: calculate the remainders of the input divided by 2 repeatedly to get the (inverted) bits [ divide each digit by 2 [ for each DU - delete DU (for exit if) > go to digit [->+< dec digit / set remainder [->->+>] if digit gt 0: dec digit / del remainder / inc solution / goto 0 pointer: (value(0) remainder is set) or (0 solution gt 1) <[<<<] go to DU > go to digit ] <+ set DU >>>[-<<+>>] move solution to digit <[ if remainder >>>> go to next digit +++++ +++++ add 10 to digit/carry <<<<- go back and delete remainder ] >>> go to next DU ] append new bit >>>+[->+] go to and delete CCB >- set new CCB <+[-<+]-< go to carry [ if carry >>+[->+]-<+ set last bit +[-<+]-<[-] go to and clear carry ] check if first digit became 0 / neccessary to check if value has been completely processed < <<<<<[<<<<<]>>>>> go to first DU >[ if digit gt 0 << go to exit if ]<[ else - delete DU >>> go to exit else of next digit ] >> go to DU / DE if all digits processed ] end of division loop decode binary values >>>+[->+] go to and delete CCB (after last bit) <- delete leading 1 < go to first bit Start of bit decoder [ unary: ><+-.,[] 01234567 62 > 62 60 < -2 43 + -17 45 - 2 46 . 1 44 , -2 91 [ 47 93 ] 2 tape: start of bytes marker/SB(-1), [binary data], 60(print char/PC), 15 ] +[- while not SB Set least significant to octal value of three bits [<++>-] if first bit set add 2 to second bit <[<++>-] for each second bit add 2 to third bit >+++[>+++++<-] multiplier 15 >[<+<++++>>-] setup table 60 15 run through the 8 possibilities 0 greater than <<++ set PC = 62 (greater than) <[ if value gt 0 go to next char 1 less than >-- set PC = 60 (less than) <-[ if value gt 1 go to next char 2 plus >>[<->-]<-- set PC = 43 (plus) <-[ if value gt 1 go to next char 3 minus >++ set PC = 45 (minus) <-[ if value gt 1 go to next char 4 dot >+ set PC = 46 (dot) <-[ if value gt 1 go to next char 5 comma >-- set PC = 44 (comma) <-[ if value gt 1 go to next char 6 left bracket >+[>+<-]>[<++>-]<+ set PC = 91 (left bracket) (inc (45) / double (90) / inc (91)) <-[ if value gt 1 go to next char 7 right bracket >++ set PC = 93 (right bracket) <- decrease value the last time to exit if ]]]]]]] close all ifs >.[-] print char and clear PC >[-] clear 15 if still existant <<< go to next bits + repeat if not SB ] 

Python 2, 80 79 63 55 + 86 64 = 119 Bytes

Thanks to Sp3000 for his ^numerous suggestions, saving a lot of bytes.

Brainfuck to Unary, 78 77 61 53 + 2 = 55 bytes

Added two bytes to account for surrounding "s on input.

print int(`[1]+map("><+-.,[]".find,input())`[1::3],8) 

Unary to Brainfuck, 86 64 bytes

print''.join("><+-.,[]"[int(i)]for i in oct(input())[2:]if'L'>i) 

Check it out on ideone here.

CJam, 35 bytes

Brainfuck to Unary, 17 bytes

1r"><+-.,[]"f#+8b 

<+-.,[]"f#+8b&input=++++++[>++++++++++++<-]>.>++++++++++[>++++++++++<-]>+.+++++++..+++.>++++[>+++++++++++<-]>.<+++[>----<-]>.<<<<<+++[>+++++<-]>.>>.+++.------.--------.>>+." rel="nofollow">Try it online.

How it works

 r e# Read a whitespace-separated token from STDIN. f e# For each character in the token: "><+-.,[]" # e# Find its index in this string. 1 + e# Prepend a 1 to the results. 8b e# Convert to integer, using base 8 conversion. 

Unary to Brainfuck, 18 bytes

ri8b"><+-.,[]"f=1> 

<+-.,[]"f=1>&input=239234107117088762456728667968602154633390994619022073954825877681363348343524058579165785448174718768772358485472231582844556848101441556" rel="nofollow">Try it online.

How it works

r e# Read a whitespace separated token from STDIN. i e# Interpret as integer. 8b e# Convert to array using base 8 conversion. f e# For each digit: "><+-.,[]" = e# Select the corresponding character from the string. 1> e# Discard the first character. 

Bash + coreutils, 39 + 47 = 86

b2u.sh:

dc -e8i1`tr '<>+-.,[]' 0-7`p|tr -dc 0-9 

u2b.sh:

dc -e8o?p|tr -dc 0-9|tr 0-7 '<>+-.,[]'|cut -c2- 

Test output:

$ echo "++++++[>++++++++++++<-]>.>++++++++++[>++++++++++<-]>+.+++++++..+++.>++++[>+++++++++++<-]>.<+++[>----<-]>.<<<<<+++[>+++++<-]>.>>.+++.------.--------.>>+." | ./b2u.sh 239234206933197750788456456928845900180965531636435002144714670872282710109774487453364223333807054152602699434658684117337034763550216789 $ echo 239234206933197750788456456928845900180965531636435002144714670872282710109774487453364223333807054152602699434658684117337034763550216789 | ./u2b.sh ++++++[>++++++++++++<-[>.>++++++++++[>++++++++++<-[>+.+++++++..+++.>++++[>+++++++++++<-[>.<+++[>----<-[>.<<<<<+++[>+++++<-[>.>>.+++.------.--------.>>+. $ 

Japt, 13 + 13 = 26 bytes

Brainfuck to Unary

i< n"><+-.,[] 

Try it!

Explanation:

i< :Insert a "<" at the start of the string (representing 1) n :Convert string to decimal by interpreting as: "><+-.,[] : A base 8 number represented by the 8 characters of BF 

Unary to Brainfuck

s"><+-.,[]" Å 

Try it!

Explanation:

s :Convert decimal to string representation of: "><+-.,[]" : Base 8 using the BF characters to represent the 8 digits Å :Remove the extra "<" at the front 

Notes

I can't find the meta post, but if my memory serves correctly answers are allowed to limit I/O to numbers that their language can support, as long as they implement an algorithm that would work if the language starts supporting larger numbers. That is the case here, Japt's ability to treat a string as "base n using these n characters for the digits" can only use the number data type on the other side of the operation, and thus the test cases won't actually run successfully; the output of the first program and the input of the second program will coerce the number to one which can be represented as a number, rather than using the actual number. For numbers which can be perfectly represented by Japt's number data type these programs will work as desired, and if the number data type changes to support larger numbers then these programs will start supporting those numbers as well.

05AB1E, 33 (17 + 16) bytes

Brainfuck to Unary-length:

"><+-.,[]"sSk1š8β 

Try it online or verify all test cases.

Explanation:

"><+-.,[]" # Push string "><+-.,[]" s # Swap to take the (implicit) input S # Convert it to a list of characters k # Check for each the index in the string 1š # Prepend a 1 to the list of indices 8β # Convert the list to Base-8 (and output implicitly) 

Unary-length to Brainfuck

8в¦"><+-.,[]"sèJ 

Try it online or verify all test cases.

Explanation:

8в # Convert the (implicit) input-list from Base-8 to Base-10 ¦ # Remove the first 1 "><+-.,[]" # Push string "><+-.,[]" s # Swap the list and string on the stack è # Index each integer into this string J # Join everything together (and output implicitly) 

Dart, 77 + 142 = 219 bytes

f(s)=>BigInt.parse('1'+s.split('').map('><+-.,[]'.indexOf).join(''),radix:8); F(n)=>BigInt.parse(n).toRadixString(8).split('').map((s)=>'><+-.,[]'.substring(int.parse(s),int.parse(s)+1)).join('').toString().substring(1); 

Try it online!

C (gcc), 254 bytes

#include"gmp.h" f(i,o)char*i,*o;{mpz_t l;char*c="><+-.,[]";if(*i>47&*i<58)for(mpz_init_set_str(l,i,0),mpz_get_str(o,8,l);*o;*o++=o[1]?c[o[1]-48]:0);else for(mpz_init_set_si(l,1);mpz_get_str(o,10,l),*i;mpz_mul_si(l,l,8),mpz_add_ui(l,l,strchr(c,*i++)-c));} 

Try it online!

Determines which direction to go based on input (i), stores the result in the passed buffer (o). Note that some compilers allow saving of 4 bytes based on the implementation-defined ordering of the o++. In these cases the provided solution will truncate an extra character off of the Unary->BF conversion and the o[1]'s can all be replaced by *o to recover behaviour.

Thunno 2, 17 + 15 = 32 bytes

"><+-.,[]"$€Ȯ1Ƥ8ḋ 

Try it online! (Brainfuck -> Unary)

8Bḣ"><+-.,[]"si 

Try it online! (Unary -> Brainfuck)

Explanation

"><+-.,[]"$€Ȯ1Ƥ8ḋ # Implicit input "><+-.,[]" # Push the string $€Ȯ # Index of each character in the input 1Ƥ # Prepend a 1 8ḋ # Convert from base 8 # Implicit output 

8Bḣ"><+-.,[]"si # Implicit input 8B # Convert to base 8 ḣ # Remove the leading 1 "><+-.,[]"si # Index into the string # Implicit output