Rust driver for Logitech G29
This library provides a Rust interface for Logitech G29 wheel/pedal and force feedback control.
- Hidapi : "2.5.0"
use g29::controller::Controller; fn main() { // Create a new G29 instance let mut g29 = Controller::new(); // set force feedback for G29 controller - make sure to set the Logitech to PS3 Mode g29.g29.lock().unwrap().force_feedback_constant(0.6); // Start the reading thread to continuously read input from the G29 device g29.start_pumping(); loop { println!("steering = {:?}", g29.g29.lock().unwrap().get_state()); } }Interacting with the driver without starting a thread to set force feedback.
use g29::interface::G29Interface; fn main() { // Create a new G29 driver instance let mut g29 = G29Interface::new(); // set ForceFeedback g29.force_feedback_constant(0.5); // Reset the G29 device, including steering wheel calibration g29.reset(); // Example: Set autocenter with a strength of 0.5 and a rate of 0.05 g29.set_autocenter(0.5, 0.05); }Reading input from the Logitech G29 in the main thread , and geting the state input in carla format
use g29::controller::Controller; fn main() { // Create a new G29 instance let mut g29 = Controller::new(); // set G29 Steer to the center g29.g29.lock().unwrap().set_autocenter(0.5,0.05); // reading loop { // reading every 10ms from the G29 g29.g29.lock().unwrap().pump(10); // get the readed values println!("Carla_controle = {:?}", g29.g29.lock().unwrap().carla_vehicle_controle()); } }- Thread for reading data from G29
- Writing Test
- Make it as Lib after testing the full code
- Reading reverse mode from buttons in the G29 controller
- Make methode to transform the State for Carla user "throttle [0 -> 1] brake [0 -> 1] brake[0->1]"
Contributions are welcome! If you have improvements, bug fixes, or new features to propose, please submit a pull request.
Only G29 logitech controller Driving wheel/pedals is supported for now, and also the force Feedback with the PS3 mode
Support Force feedback
Buy me a Coffee : paypal