version: '2' services: liteserver: image: ghcr.io/hacker-volodya/liteserver ports: - 30303:30303/udp # nodes p2p (host port and container port must be equal, container port is specified in config.yml) - 3000:3000/tcp # web interface - 3333:3333/tcp # liteapi restart: always

indexer: ip_address: 0.0.0.0:30303 rocks_db_path: /data/rocksdb file_db_path: /data/file state_gc_options: null blocks_gc_options: # - `before_previous_key_block` - on each new key block delete all blocks before the previous one # - `before_previous_persistent_state` - on each new key block delete all blocks before the previous key block with persistent state kind: before_previous_key_block enable_for_sync: true # Whether to enable blocks GC during sync. max_blocks_per_batch: 100000 # Max `WriteBatch` entries before apply shard_state_cache_options: ttl_sec: 120 # LRU cache item duration. db_options: rocksdb_lru_capacity: 1 GB cells_cache_size: 2 GB low_thread_pool_size: 8 high_thread_pool_size: 8 max_subcompactions: 8 archive_options: gc_interval: # - `manual` - Do not perform archives GC # - `persistent_states` - Archives GC triggers on each persistent state type: persistent_states offset_sec: 300 # Remove archives after this interval after the new persistent state sync_options: old_blocks_policy: # Whether to sync very old blocks type: ignore # type: sync # from_seqno: 100 parallel_archive_downloads: 16 save_to_disk_threshold: 1073741824 max_block_applier_depth: 32 force_use_get_next_block: false # Ignore archives persistent_state_options: prepare_persistent_states: false persistent_state_parallelism: 1 remove_old_states: true adnl_options: query_min_timeout_ms: 500 # Minimal ADNL query timeout. Will override the used timeout if it is less. query_default_timeout_ms: 5000 # Default ADNL query timeout. Will be used if no timeout is specified. transfer_timeout_sec: 3 # ADNL multipart transfer timeout. It will drop the transfer if it is not completed within this timeout. clock_tolerance_sec: 60 # Permissible time difference between remote and local clocks. channel_reset_timeout_sec: 30 # Drop channels which had no response for this amount of time. address_list_timeout_sec: 1000 # How much time address lists from packets should be valid. packet_history_enabled: false # Whether to add additional duplicated packets check. packet_signature_required: true # Whether handshake packets signature is mandatory. force_use_priority_channels: false # Whether to use priority channels for queries. use_loopback_for_neighbours: false # Whether to use loopback ip to communicate with nodes on the same ip version: null # ADNL protocol version rldp_options: max_answer_size: 10485760 # Max allowed RLDP answer size in bytes. Query will be rejected if answer is bigger. max_peer_queries: 16 # Max parallel RLDP queries per peer. query_min_timeout_ms: 500 # Min RLDP query timeout. query_max_timeout_ms: 10000 # Max RLDP query timeout query_wave_len: 10 # Number of FEC messages to send in group. There will be a short delay between them. query_wave_interval_ms: 10 # Interval between FEC broadcast waves. force_compression: false # Whether requests will be compressed. dht_options: value_ttl_sec: 3600 # Default stored value timeout used for [`Node::store_overlay_node`] and [`Node::store_address`] query_timeout_ms: 1000 # ADNL query timeout default_value_batch_len: 5 # Amount of DHT peers, used for values search bad_peer_threshold: 5 # Max peer penalty points. On each unsuccessful query every peer gains 2 points, and then they are reduced by one on each good action. max_allowed_k: 20 # Max allowed `k` value for DHT `FindValue` query. max_key_name_len: 127 # Max allowed key name length (in bytes). See [`everscale_network::proto::dht::Key`] max_key_index: 15 # Max allowed key index storage_gc_interval_ms: 10000 # Storage GC interval. Will remove all outdated entries overlay_shard_options: max_neighbours: 200 # More persistent list of peers. Used to distribute broadcasts. max_broadcast_log: 1000 # Max simultaneous broadcasts. broadcast_gc_interval_ms: 1000 # Broadcasts GC interval. Will leave at most `max_broadcast_log` each iteration. overlay_peers_timeout_ms: 60000 # Neighbours or random peers update interval. max_ordinary_broadcast_len: 768 # Packets with length bigger than this will be sent using FEC broadcast. broadcast_target_count: 5 # Max number of peers to distribute broadcast to. secondary_broadcast_target_count: 3 # Max number of peers to redistribute ordinary broadcast to. secondary_fec_broadcast_target_count: 3 # Max number of peers to redistribute FEC broadcast to. fec_broadcast_wave_len: 20 # Number of FEC messages to send in group. There will be a short delay between them. fec_broadcast_wave_interval_ms: 10 # Interval between FEC broadcast waves. broadcast_timeout_sec: 60 # Overlay broadcast timeout. It will be forcefully dropped if not received in this time. force_compression: false # Whether requests will be compressed. neighbours_options: max_neighbours: 16 reloading_min_interval_sec: 10 reloading_max_interval_sec: 30 ping_interval_ms: 500 search_interval_ms: 1000 ping_min_timeout_ms: 10 ping_max_timeout_ms: 1000 default_rldp_roundtrip_ms: 2000 max_ping_tasks: 6 max_exchange_tasks: 6