doipclient is a pure Python 3 Diagnostic over IP (DoIP) client which can be used for communicating with modern ECU's over automotive ethernet. It implements the majority of ISO-13400 (2019) from the perspective of a short-lived synchronous client. The primary use case is to serve as a transport layer implementation for the udsoncan library. The code is published under MIT license on GitHub (jacobschaer/python-doipclient).
The documentation is available here : https://python-doipclient.readthedocs.io/
- Python 3.6+
using pip:
pip install doipclient
using pytest:
pip install pytest pytest-mock pytest
Updated version of udsoncan's example using python_doip instead of IsoTPSocketConnection
import SomeLib.SomeCar.SomeModel as MyCar import udsoncan from doipclient import DoIPClient from doipclient.connectors import DoIPClientUDSConnector from udsoncan.client import Client from udsoncan.exceptions import * from udsoncan.services import * udsoncan.setup_logging() ecu_ip = '127.0.0.1' ecu_logical_address = 0x00E0 doip_client = DoIPClient(ecu_ip, ecu_logical_address) conn = DoIPClientUDSConnector(doip_client) with Client(conn, request_timeout=2, config=MyCar.config) as client: try: client.change_session(DiagnosticSessionControl.Session.extendedDiagnosticSession) # integer with value of 3 client.unlock_security_access(MyCar.debug_level) # Fictive security level. Integer coming from fictive lib, let's say its value is 5 client.write_data_by_identifier(udsoncan.DataIdentifier.VIN, 'ABC123456789') # Standard ID for VIN is 0xF190. Codec is set in the client configuration print('Vehicle Identification Number successfully changed.') client.ecu_reset(ECUReset.ResetType.hardReset) # HardReset = 0x01 except NegativeResponseException as e: print('Server refused our request for service %s with code "%s" (0x%02x)' % (e.response.service.get_name(), e.response.code_name, e.response.code)) except (InvalidResponseException, UnexpectedResponseException) as e: print('Server sent an invalid payload : %s' % e.response.original_payload) # Because we reset our UDS server, we must also reconnect/reactivate the DoIP socket # Alternatively, we could have used the auto_reconnect_tcp flag on the DoIPClient # Note: ECU's do not restart instantly, so you may need a sleep() before moving on doip_client.reconnect() client.tester_present() # Cleanup the DoIP Socket when we're done. Alternatively, we could have used the # close_connection flag on conn so that the udsoncan client would clean it up doip_client.close()The python-uds can also be used but requires a fork until the owner merges this PR Doip #63. For now, to use the port:
using pip:
git clone https://github.com/jacobschaer/python-uds git checkout doip cd python-uds pip install .
Example:
from uds import Uds ecu = Uds(transportProtocol="DoIP", ecu_ip="192.168.1.1", ecu_logical_address=1) try: response = ecu.send([0x3E, 0x00]) print(response) # This should be [0x7E, 0x00] except: print("Send did not complete")