0

I need help. I don't know what i did wrong because i have configured the dhcp pool, subinterfaces and dhcp relay agent. Gateway pc uses static ip address while Branch pc acquired their ip address through dhcp server which is the Gateway router. The only problem now is the pc on the Branch side is not getting the ip address.

![enter image description here

--Gateway router--

 ip dhcp excluded-address 192.168.1.0 192.168.1.5 ip dhcp excluded-address 202.188.1.0 202.188.1.5 ip dhcp excluded-address 172.16.1.0 172.16.1.5 ! ip dhcp pool ADMIN network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 ip dhcp pool STAFF network 202.188.1.0 255.255.255.0 default-router 202.188.1.1 ip dhcp pool GUEST network 172.16.1.0 255.255.255.0 default-router 172.16.1.1 ! ! ! no ip cef no ipv6 cef ! ! ! ! ! ! ! ! ! ! ! ! spanning-tree mode pvst ! ! ! ! ! ! interface GigabitEthernet0/0/0 no ip address duplex auto speed auto ! interface GigabitEthernet0/0/0.10 encapsulation dot1Q 10 ip address 192.168.1.1 255.255.255.0 ! interface GigabitEthernet0/0/0.20 encapsulation dot1Q 20 ip address 202.188.1.1 255.255.255.0 ! interface GigabitEthernet0/0/0.30 encapsulation dot1Q 30 ip address 172.16.1.1 255.255.255.0 ! interface GigabitEthernet0/0/1 no ip address duplex auto speed auto shutdown ! interface GigabitEthernet0/0/2 no ip address duplex auto speed auto shutdown ! interface Serial0/1/0 ip address 10.0.0.1 255.255.255.252 clock rate 128000 ! interface Serial0/1/1 no ip address clock rate 2000000 shutdown ! interface Vlan1 no ip address shutdown ! router ospf 1 router-id 1.1.1.1 log-adjacency-changes network 10.0.0.0 0.0.0.3 area 0 network 192.168.1.0 0.0.0.255 area 0 network 202.188.1.0 0.0.0.255 area 0 network 172.16.1.0 0.0.0.255 area 0 ! ip classless !

--GWSwitch--

 spanning-tree mode pvst spanning-tree extend system-id ! interface FastEthernet0/1 switchport access vlan 10 switchport mode access ! interface FastEthernet0/2 switchport access vlan 10 switchport mode access ! interface FastEthernet0/3 switchport access vlan 10 switchport mode access ! interface FastEthernet0/4 switchport access vlan 10 switchport mode access ! interface FastEthernet0/5 switchport access vlan 10 switchport mode access ! interface FastEthernet0/6 switchport access vlan 20 switchport mode access ! interface FastEthernet0/7 switchport access vlan 20 switchport mode access ! interface FastEthernet0/8 switchport access vlan 20 switchport mode access ! interface FastEthernet0/9 switchport access vlan 20 switchport mode access ! interface FastEthernet0/10 switchport access vlan 20 switchport mode access ! interface FastEthernet0/11 switchport access vlan 30 switchport mode access ! interface FastEthernet0/12 switchport access vlan 30 switchport mode access ! interface FastEthernet0/13 switchport access vlan 30 switchport mode access ! interface FastEthernet0/14 switchport access vlan 30 switchport mode access ! interface FastEthernet0/15 switchport access vlan 30 switchport mode access ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19 ! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface GigabitEthernet0/1 switchport trunk native vlan 99 switchport mode trunk ! interface GigabitEthernet0/2 ! interface Vlan1 no ip address shutdown ! ! ! ! line con 0 ! line vty 0 4 login line vty 5 15 login ! ! ! ! end

--Branch Router--

 ip dhcp excluded-address 192.168.1.0 192.168.1.5 ip dhcp excluded-address 202.188.1.0 202.188.1.5 ip dhcp excluded-address 172.16.1.0 172.16.1.5 ! ip dhcp pool ADMIN ! ! ! no ip cef no ipv6 cef ! ! ! ! ! ! ! ! ! ! ! ! spanning-tree mode pvst ! ! ! ! ! ! interface GigabitEthernet0/0/0 no ip address duplex auto speed auto ! interface GigabitEthernet0/0/0.10 encapsulation dot1Q 10 ip address 192.168.1.2 255.255.255.0 ip helper-address 10.0.0.1 ! interface GigabitEthernet0/0/0.20 encapsulation dot1Q 20 ip address 202.188.1.2 255.255.255.0 ip helper-address 10.0.0.1 ! interface GigabitEthernet0/0/0.30 encapsulation dot1Q 30 ip address 172.16.1.2 255.255.255.0 ip helper-address 10.0.0.1 ! interface GigabitEthernet0/0/1 no ip address duplex auto speed auto shutdown ! interface GigabitEthernet0/0/2 no ip address duplex auto speed auto shutdown ! interface Serial0/1/0 ip address 10.0.0.2 255.255.255.252 ! interface Serial0/1/1 no ip address clock rate 2000000 shutdown ! interface Vlan1 no ip address shutdown ! router ospf 1 router-id 2.2.2.2 log-adjacency-changes network 10.0.0.0 0.0.0.3 area 0 network 192.168.1.0 0.0.0.255 area 0 network 202.188.1.0 0.0.0.255 area 0 network 172.16.1.0 0.0.0.255 area 0 !

--BSwitch--

 interface FastEthernet0/1 switchport access vlan 10 switchport mode access ! interface FastEthernet0/2 switchport access vlan 10 switchport mode access ! interface FastEthernet0/3 switchport access vlan 10 switchport mode access ! interface FastEthernet0/4 switchport access vlan 10 switchport mode access ! interface FastEthernet0/5 switchport access vlan 10 switchport mode access ! interface FastEthernet0/6 switchport access vlan 20 switchport mode access ! interface FastEthernet0/7 switchport access vlan 20 switchport mode access ! interface FastEthernet0/8 switchport access vlan 20 switchport mode access ! interface FastEthernet0/9 switchport access vlan 20 switchport mode access ! interface FastEthernet0/10 switchport access vlan 20 switchport mode access ! interface FastEthernet0/11 switchport access vlan 30 switchport mode access ! interface FastEthernet0/12 switchport access vlan 30 switchport mode access ! interface FastEthernet0/13 switchport access vlan 30 switchport mode access ! interface FastEthernet0/14 switchport access vlan 30 switchport mode access ! interface FastEthernet0/15 switchport access vlan 30 switchport mode access ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19 ! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface GigabitEthernet0/1 switchport mode trunk ! interface GigabitEthernet0/2 !
Improve this question
3
  • 2
    You are using duplicate addressing on each side. That will not work unless you jump through some hoops. The VLANs on one side are not the VLANS on the other side despite the same VLAN numbers, because the are separate by layer-3 (router). You cannot use duplicate addressing. Change the addressing on one side. Commented Aug 28, 2021 at 12:04
  • CCNA practice task? Commented Sep 1, 2021 at 2:47
  • Did any answer help you? if so, you should accept the answer so that the question does not keep popping up forever, looking for an answer. Alternatively, you could post and accept your own answer. Commented Dec 23, 2021 at 21:10

1 Answer 1

Reset to default
2

Thought it might be beneficial to others to expand @Ron Maupin's comment to an actual answer.

What happens with the stated configuration is as follows:

  1. A guest connects to VLAN 30 in Branch network and broadcasts a DHCP Discover packet
  2. Branch switch floods the Disc packet
  3. Brand router receives it, and as instructed by the IP Helper config forwards the packet to Gateway router
  4. Gateway acting as DHCP server will respond with DHCP Offer
  5. Because the Gateway server sees network 172.16.1.0/24 as locally connected on g0/0/0.30, it will not forward the packet through s0/1/0, but through g0/0/0.30
  6. Devices in the main office VLAN 30 will receive the DHCP Offer, but since they didn't request it they will drop the packet

As Ron says, changing the IP addressing on one side is the solution. Using the current devices and IP ranges it means splitting the networks.

How to go on from there depends. If all devices in the main office use static IP addressing, the existing DCHP pools and reservations can just be changed to provide IPs in range x.x.x.128/25. All addresses in x.x.x.0/25 are then available in the main office, and devices in the branch office will receive IPs starting (for example) from x.x.x.130/25.

If, on the other hand, also main office requires DHCP services, it's necessary to change the existing pools to ranges x.x.x.0/25, and create new pools in ranges x.x.x.128/25 for the branch use.

EDIT

Oops! Routing! OSPF needs to be reconfigured to reflect the new network configuration.

Improve this answer

Start asking to get answers

Find the answer to your question by asking.

Ask question

Explore related questions

See similar questions with these tags.