Log message: coreutils: Update to 8.32 * Noteworthy changes in release 8.32 (2020-03-05) [stable] ** Bug fixes cp now copies /dev/fd/N correctly on platforms like Solaris where it is a character-special file whose minor device number is N. [bug introduced in fileutils-4.1.6] dd conv=fdatasync no longer reports a "Bad file descriptor" error when fdatasync is interrupted, and dd now retries interrupted calls to close, fdatasync, fstat and fsync instead of incorrectly reporting an "Interrupted system call" error. [bugs introduced in coreutils-6.0] df now correctly parses the /proc/self/mountinfo file for unusual entries like ones with '\r' in a field value ("mount -t tmpfs tmpfs \ /foo$'\r'bar"), when the source field is empty ('mount -t tmpfs "" /mnt'), and when the filesystem type contains characters like a blank which need escaping. [bugs introduced in coreutils-8.24 with the introduction of reading the /proc/self/mountinfo file] factor again outputs immediately when stdout is a tty but stdin is not. [bug introduced in coreutils-8.24] ln works again on old systems without O_DIRECTORY support (like Solaris 10), and on systems where symlink ("x", ".") fails with errno \ == EINVAL (like Solaris 10 and Solaris 11). [bug introduced in coreutils-8.31] rmdir --ignore-fail-on-non-empty now works correctly for directories that fail to be removed due to permission issues. Previously the exit status was reversed, failing for non empty and succeeding for empty directories. [bug introduced in coreutils-6.11] 'shuf -r -n 0 file' no longer mistakenly reads from standard input. [bug introduced with the --repeat feature in coreutils-8.22] split no longer reports a "output file suffixes exhausted" error when the specified number of files is evenly divisible by 10, 16, 26, for --numeric, --hex, or default alphabetic suffixes respectively. [bug introduced in coreutils-8.24] seq no longer prints an extra line under certain circumstances (such as 'seq -f "%g " 1000000 1000000'). [bug introduced in coreutils-6.10] ** Changes in behavior Several programs now check that numbers end properly. For example, 'du -d 1x' now reports an error instead of silently ignoring the 'x'. Affected programs and options include du -d, expr's numeric operands on non-GMP builds, install -g and -o, ls's TABSIZE environment variable, mknod b and c, ptx -g and -w, shuf -n, and sort --batch-size and --parallel. date now parses military time zones in accordance with common usage: "A" to "M" are equivalent to UTC+1 to UTC+12 "N" to "Y" are equivalent to UTC-1 to UTC-12 "Z" is "zulu" time (UTC). For example, 'date -d "09:00B" is now equivalent to 9am in UTC+2 \ time zone. Previously, military time zones were parsed according to the obsolete rfc822, with their value negated (e.g., "B" was equivalent to UTC-2). [The old behavior was introduced in sh-utils 2.0.15 ca. 1999, predating coreutils package.] ls issues an error message on a removed directory, on GNU/Linux systems. Previously no error and no entries were output, and so indistinguishable from an empty directory, with default ls options. uniq no longer uses strcoll() to determine string equivalence, and so will operate more efficiently and consistently. ** New Features ls now supports the --time=birth option to display and sort by file creation time, where available. od --skip-bytes now can use lseek even if the input is not a regular file, greatly improving performance in some cases. stat(1) supports a new --cached= option, used on systems with statx(2) to control cache coherency of file system attributes, useful on network file systems. ** Improvements stat and ls now use the statx() system call where available, which can operate more efficiently by only retrieving requested attributes. stat and tail now know about the "binderfs", "dma-buf-fs", \ "erofs", "ppc-cmm-fs", and "z3fold" file systems. stat -f -c%T now reports the file system type, and tail -f uses inotify. ** Build-related gzip-compressed tarballs are distributed once again 

Log message: *: bump PKGREVISION for perl-5.32. 

Log message: (sysutils/coreutils, misc/gnuls) Updated from 8.29 to 8.31 ---------------------------------------------------------------- * Noteworthy changes in release 8.31 (2019-03-10) [stable] ** Bug fixes 'base64 a b' now correctly diagnoses 'b' as the extra operand, not 'a'. [bug introduced in coreutils-5.3.0] When B already exists, 'cp -il A B' no longer immediately fails after asking the user whether to proceed. [This bug was present in "the beginning".] df no longer corrupts displayed multibyte characters on macOS. [bug introduced with coreutils-8.18] seq no longer outputs inconsistent decimal point characters for the last number, when locales are misconfigured. [bug introduced in coreutils-7.0] shred, sort, and split no longer falsely report ftruncate errors when outputting to less-common file types. For example, the shell command 'sort /dev/null -o /dev/stdout | cat' no longer fails with an "error truncating" diagnostic. [bug was introduced with coreutils-8.18 for sort and split, and (for shared memory objects only) with fileutils-4.1 for shred] sync no longer fails for write-only file arguments. [bug introduced with argument support to sync in coreutils-8.24] 'tail -f file | filter' no longer exits immediately on AIX. [bug introduced in coreutils-8.28] 'tail -f file | filter' no longer goes into an infinite loop if filter exits and SIGPIPE is ignored. [bug introduced in coreutils-8.28] ** Changes in behavior cksum, dd, hostid, hostname, link, logname, sleep, tsort, unlink, uptime, users, whoami, yes: now always process --help and --version options, regardless of any other arguments present before any optional '--' end-of-options marker. nohup now processes --help and --version as first options even if other parameters follow. 'yes a -- b' now outputs 'a b' instead of including the end-of-options marker as before: 'a -- b'. echo now always processes backslash escapes when the POSIXLY_CORRECT environment variable is set. When possible 'ln A B' now merely links A to B and reports an error if this fails, instead of statting A and B before linking. This uses fewer system calls and avoids some races. The old statting approach is still used in situations where hard links to directories are allowed (e.g., NetBSD when superuser). ls --group-directories-first will also group symlinks to directories. 'test -a FILE' is not supported anymore. Long ago, there were concerns about the high probability of humans confusing the -a primary with the -a binary operator, so POSIX changed this to 'test -e FILE'. Scripts using it were already broken and non-portable; the -a unary operator was never documented. wc now treats non breaking space characters as word delimiters unless the POSIXLY_CORRECT environment variable is set. ** New features id now supports specifying multiple users. 'date' now supports the '+' conversion specification flag, introduced in POSIX.1-2017. printf, seq, sleep, tail, and timeout now accept floating point numbers in either the current or the C locale. For example, if the current locale's decimal point is ',', 'sleep 0,1' and 'sleep 0.1' now mean the same thing. Previously, these commands accepted only C-locale syntax with '.' as the decimal point. The new behavior is more compatible with other implementations in non-C locales. test now supports the '-N FILE' unary operator (like e.g. bash) to check whether FILE exists and has been modified since it was last read. env now supports '--default-signal[=SIG]', '--ignore-signal[=SIG]', and '--block-signal[=SIG], to setup signal handling before executing a program. env now supports '--list-signal-handling' to indicate non-default signal handling before executing a program. ** New commands basenc is added to complement existing base64,base32 commands, and encodes and decodes printable text using various common encodings: base64,base64url,base32,base32hex,base16,base2,z85. ** Improvements ls -l now better aligns abbreviated months containing digits, which is common in Asian locales. stat and tail now know about the "sdcardfs" file system on Android. stat -f -c%T now reports the file system type, and tail -f uses inotify. stat now prints file creation time when supported by the file system, on GNU Linux systems with glibc >= 2.28 and kernel >= 4.11. ---------------------------------------------------------------- * Noteworthy changes in release 8.30 (2018-07-01) [stable] ** Bug fixes 'cp --symlink SRC DST' will again correctly validate DST. If DST is a regular file and SRC is a symlink to DST, then cp will no longer allow that operation to clobber DST. Also with -d, if DST is a symlink, then it can always be replaced, even if it points to SRC on a separate device. [bugs introduced with coreutils-8.27] 'cp -n -u' and 'mv -n -u' now consistently ignore the -u option. Previously, this option combination suffered from race conditions that caused -u to sometimes override -n. [bug introduced with coreutils-7.1] 'cp -a --no-preserve=mode' now sets appropriate default permissions for non regular files like fifos and character device nodes etc., and leaves mode bits of existing files unchanged. Previously it would have set executable bits on created special files, and set mode bits for existing files as if they had been created. [bug introduced with coreutils-8.20] 'cp --remove-destination file symlink' now removes the symlink even if it can't be traversed. [bug introduced with --remove-destination in fileutils-4.1.1] ls no longer truncates the abbreviated month names that have a display width between 6 and 12 inclusive. Previously this would have output ambiguous months for Arabic or Catalan locales. 'ls -aA' is now equivalent to 'ls -A', since -A now overrides -a. [bug introduced in coreutils-5.3.0] 'mv -n A B' no longer suffers from a race condition that can overwrite a simultaneously-created B. This bug fix requires platform support for the renameat2 or renameatx_np syscalls, found in recent Linux and macOS kernels. As a side effect, ‘mv -n A A’ now silently does nothing if A exists. [bug introduced with coreutils-7.1] ** Changes in behavior 'cp --force file symlink' now removes the symlink even if it is self referential. ls --color now matches file extensions case insensitively. ** New features cp --reflink now supports --reflink=never to enforce a standard copy. env supports a new -v/--debug option to show verbose information about each processing step. env supports a new -S/--split-string=S option to split a single argument string into multiple arguments. Used to pass multiple arguments in scripts (shebang lines). md5sum accepts a new option: --zero (-z) to delimit the output lines with a NUL instead of a newline character. This also disables file name escaping. This also applies to sha*sum and b2sum. rm --preserve-root now supports the --preserve-root=all option to reject any command line argument that is mounted to a separate file system. ** Improvements cut supports line lengths up to the max file size on 32 bit systems. Previously only offsets up to SIZE_MAX-1 were supported. stat and tail now know about the "exfs" file system, which is a version of XFS. stat -f --format=%T now reports the file system type, and tail -f uses inotify. wc avoids redundant processing of ASCII text in multibyte locales, which is especially significant on macOS. 

Log message: Bump PKGREVISIONs for perl 5.30.0 

Log message: Recursive bump for perl5-5.28.0 

Log message: PKGGNUDIR and PKGMANDIR fixes. 

Log message: Update to get misc/gnuls package to work with latest sysutils/coreutils-8.22. 

Log message: Add symlinks in gnu/man/man1/ ++pkgrevision