Return to Question

I've been trying to setup my stepper motor with my RPI according to this guide: http://www.raspberrypi-spy.co.uk/2012/07/stepper-motor-control-in-python/

However, nothing seems to be happening, have I've wired my pi wrong? Here are two pictures of my setup:

I've also tried to run this script: http://blog.scphillips.com/2012/12/a-python-class-to-move-the-stepper-motor/

I'm getting no errors from either of the scripts. What am I doing wrong?

Edit 1

When I run the code in the second link the output is:

$ sudo python move.py Pause in seconds: 0.0029296875 moving 1024 steps moving -1024 steps moving -1024 steps moving -1024 steps moving 2048 steps 

Notice that the code in the second example is setting up the pins like this:

GPIO.setmode(GPIO.BOARD) m = Motor([18,22,24,26]) 

Is that ok?

EDIT 2 Here is another picture of the power wiring of the motor

I've been trying to setup my stepper motor with my RPI according to this guide: http://www.raspberrypi-spy.co.uk/2012/07/stepper-motor-control-in-python/

However, nothing seems to be happening, have I've wired my pi wrong? Here are two pictures of my setup:

I've also tried to run this script: http://blog.scphillips.com/2012/12/a-python-class-to-move-the-stepper-motor/

I'm getting no errors from either of the scripts. What am I doing wrong?

Edit 1

When I run the code in the second link the output is:

$ sudo python move.py Pause in seconds: 0.0029296875 moving 1024 steps moving -1024 steps moving -1024 steps moving -1024 steps moving 2048 steps 

Notice that the code in the second example is setting up the pins like this:

GPIO.setmode(GPIO.BOARD) m = Motor([18,22,24,26]) 

Is that ok?

EDIT 2 Here is another picture of the power wiring of the motor

EDIT3 Here is the connection that solved the problem

I've been trying to setup my stepper motor with my RPI according to this guide: http://www.raspberrypi-spy.co.uk/2012/07/stepper-motor-control-in-python/

However, nothing seems to be happening, have I've wired my pi wrong? Here are two pictures of my setup:

I've also tried to run this script: http://blog.scphillips.com/2012/12/a-python-class-to-move-the-stepper-motor/

I'm getting no errors from either of the scripts. What am I doing wrong?

Edit 1

When I run the code in the second link the output is:

$ sudo python move.py Pause in seconds: 0.0029296875 moving 1024 steps moving -1024 steps moving -1024 steps moving -1024 steps moving 2048 steps 

Notice that the code in the second example is setting up the pins like this:

GPIO.setmode(GPIO.BOARD) m = Motor([18,22,24,26]) 

Is that ok?

I've been trying to setup my stepper motor with my RPI according to this guide: http://www.raspberrypi-spy.co.uk/2012/07/stepper-motor-control-in-python/

However, nothing seems to be happening, have I've wired my pi wrong? Here are two pictures of my setup:

I've also tried to run this script: http://blog.scphillips.com/2012/12/a-python-class-to-move-the-stepper-motor/

I'm getting no errors from either of the scripts. What am I doing wrong?

Edit 1

When I run the code in the second link the output is:

$ sudo python move.py Pause in seconds: 0.0029296875 moving 1024 steps moving -1024 steps moving -1024 steps moving -1024 steps moving 2048 steps 

Notice that the code in the second example is setting up the pins like this:

GPIO.setmode(GPIO.BOARD) m = Motor([18,22,24,26]) 

Is that ok?

EDIT 2 Here is another picture of the power wiring of the motor