-1

Good day, I hope you guys are good. My name is Francis From Nigeria.

I have been using raspberry for a while. I had to upgrade from Jessie to Stretch because my favorite raspberry pi 3B model is getting out of stock/supply.

I have an app that relies on USB modem, running lsusb gave the output below

Bus 001 Device 009: ID 05c6:6000 Qualcomm, Inc. Siemens SG75

running dmesg | grep "usb " gave the output below

[ 0.705686] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.705698] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.705707] usb usb1: Product: DWC OTG Controller [ 0.705716] usb usb1: Manufacturer: Linux 4.19.66-v7+ dwc_otg_hcd [ 0.705725] usb usb1: SerialNumber: 3f980000.usb [ 1.141922] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.382233] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1.382249] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.701959] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.832452] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 1.832485] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 434.793043] usb 1-1.2: new high-speed USB device number 4 using dwc_otg [ 434.924784] usb 1-1.2: New USB device found, idVendor=05c6, idProduct=f000, bcdDevice= 0.00 [ 434.924802] usb 1-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 434.924812] usb 1-1.2: Product: Qualcomm CDMA Technologies MSM [ 434.924822] usb 1-1.2: Manufacturer: Qualcomm, Incorporated [ 434.924831] usb 1-1.2: SerialNumber: 356793034849174 [ 436.035767] usb 1-1.2: USB disconnect, device number 4 [ 436.333111] usb 1-1.2: new high-speed USB device number 5 using dwc_otg [ 436.464923] usb 1-1.2: New USB device found, idVendor=05c6, idProduct=6000, bcdDevice= 0.00 [ 436.464940] usb 1-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 436.464950] usb 1-1.2: Product: Qualcomm CDMA Technologies MSM [ 436.464960] usb 1-1.2: Manufacturer: Qualcomm, Incorporated [ 436.464969] usb 1-1.2: SerialNumber: 356793034849174 [ 436.564312] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 436.564991] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 436.565620] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 436.566413] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB3 [ 482.115780] usb 1-1.2: USB disconnect, device number 5 [ 482.681598] usb 1-1.2: new high-speed USB device number 6 using dwc_otg [ 482.813286] usb 1-1.2: New USB device found, idVendor=05c6, idProduct=f000, bcdDevice= 0.00 [ 482.813303] usb 1-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 482.813313] usb 1-1.2: Product: Qualcomm CDMA Technologies MSM [ 482.813323] usb 1-1.2: Manufacturer: Qualcomm, Incorporated [ 482.813333] usb 1-1.2: SerialNumber: 356793034849174 [ 483.651760] usb 1-1.2: USB disconnect, device number 6 [ 484.051553] usb 1-1.2: new high-speed USB device number 7 using dwc_otg [ 484.183407] usb 1-1.2: New USB device found, idVendor=05c6, idProduct=6000, bcdDevice= 0.00 [ 484.183424] usb 1-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 484.183434] usb 1-1.2: Product: Qualcomm CDMA Technologies MSM [ 484.183444] usb 1-1.2: Manufacturer: Qualcomm, Incorporated [ 484.183453] usb 1-1.2: SerialNumber: 356793034849174 [ 484.188709] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 484.189920] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 484.194207] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 484.195467] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB3 [ 520.003856] usb 1-1.2: USB disconnect, device number 7 [ 520.540541] usb 1-1.2: new high-speed USB device number 8 using dwc_otg [ 520.672438] usb 1-1.2: New USB device found, idVendor=05c6, idProduct=f000, bcdDevice= 0.00 [ 520.672456] usb 1-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 520.672466] usb 1-1.2: Product: Qualcomm CDMA Technologies MSM [ 520.672476] usb 1-1.2: Manufacturer: Qualcomm, Incorporated [ 520.672485] usb 1-1.2: SerialNumber: 356793034849174 [ 521.539737] usb 1-1.2: USB disconnect, device number 8 [ 521.970415] usb 1-1.2: new high-speed USB device number 9 using dwc_otg [ 522.102347] usb 1-1.2: New USB device found, idVendor=05c6, idProduct=6000, bcdDevice= 0.00 [ 522.102365] usb 1-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 522.102375] usb 1-1.2: Product: Qualcomm CDMA Technologies MSM [ 522.102384] usb 1-1.2: Manufacturer: Qualcomm, Incorporated [ 522.102406] usb 1-1.2: SerialNumber: 356793034849174 [ 522.106482] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0 [ 522.110038] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1 [ 522.112073] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2 [ 522.112993] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB3

I usually use python 2.7 serial port module to interact with the modem in my previous jessie installation. I actually utilize 2 out of the available 4 ports for AT communication (i.e port '/dev/ttyUSB0' and '/dev/ttyUSB1'") and both works fine.

Supprisingly, i noticed that after i upgraded my operating system to stretch, only one of the port ('/dev/ttyUSB0') is functional for serial port communication, the other port no longer give any output following 'AT' command prompts.

I tried installing a clean version of buster image, but noticed the same thing, so i concluded that it has to do with the upgrade.

Pls can anyone suggest how i cant enable communication on both USB modem channels since both are very important for my application to function properly. Thanks in advance.

UPDATE: After upgrading to stretch, python raises the

"[Errno 32] Broken pipe"

when i tried assessing port /dev/ttyUSB1. This was not observed prior to the update. Also as I stated previously, I did a clean installation of Buster, and i noticed the same thing that only one (i.e. /dev/ttyUSB0 ) out of the 4 ports is functional as against 2 ports before the update.

Improve this question
4
  • Expert Linux users CAN upgrade from an earlier release, but this is NOT recommended and becomes harder if not done soon after a new release. Do a fresh install of a new release. I suggest you install "Legacy" as IMO Bullseye is still too buggy. Forget python2 and then ask a question (describing what YOU did) if you need help. Commented Mar 14, 2022 at 22:53
  • UPDATE: After upgrading to stretch, python raises the "[Errno 32] Broken pipe" when i try assessing port /dev/ttyUSB1. This was not observed prior to the update. Commented Mar 14, 2022 at 22:57
  • Thanks for your suggestion @Milliways. I actually did a fresh installation with buster but still could only make use of one of the ports. Commented Mar 14, 2022 at 22:59
  • STOP posting Comments - EDIT your Question. Frankly, as written, I have no idea what you have or have done. I refuse to waste time on Stretch. Commented Mar 14, 2022 at 23:01

1 Answer 1

Reset to default
0

I stumbled across a similar problem and answer on https://github.com/pyserial/pyserial/issues/59. I learnt that the problem is due to the serial function in python. I edited my serial port initialization code from port = serial.Serial(portid, baudrate=9600,timeout=0.1) to port = serial.Serial(portid, baudrate=9600,rtscts=True, dsrdtr=True, timeout=0.1) and i started getting feedbacks from both ports.

Improve this answer

Start asking to get answers

Find the answer to your question by asking.

Ask question

Explore related questions

See similar questions with these tags.