1

The raspbian fails to load. Tried to unpack NOOBS archive file but received error insufficient space

sudo unzip noobs282.zip ... inflating: os/Raspbian/root.tar.xz os/Raspbian/root.tar.xz: write error (disk full?). Continue? (y/n/^C) lsblk lsblk: dm-0: failed to get device path lsblk: dm-0: failed to get device path NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 14.8G 1 disk ├─sda1 8:1 1 1.2G 1 part /var/host/media/removable/RECOVERY ├─sda5 8:5 1 32M 1 part /var/host/media/removable/SETTINGS ├─sda6 8:6 1 66M 1 part /var/host/media/removable/boot ├─sda7 8:7 1 6G 1 part ├─sda8 8:8 1 80M 1 part /var/host/media/removable/boot-rbp2 ├─sda9 8:9 1 3.7G 1 part /var/host/media/removable/root-rbp2 ├─sda10 8:10 1 60M 1 part /var/host/media/removable/boot0 ├─sda11 8:11 1 2G 1 part /var/host/media/removable/root0 └─sda12 8:12 1 1.7G 1 part /var/host/media/removable/share loop0 7:0 0 3.1G 0 loop └─encstateful 253:1 0 3.1G 0 dm /var/host/timezone loop1 7:1 0 14.8M 1 loop └─b9... 253:2 0 14.6M 1 dm zram0 252:0 0 2.8G 0 disk [SWAP] mmcblk0rpmb 179:48 0 4M 0 disk mmcblk0boot0 179:16 0 4M 1 disk mmcblk0boot1 179:32 0 4M 1 disk mmcblk0 179:0 0 14.7G 0 disk ├─mmcblk0p1 179:1 0 10.5G 0 part / ├─mmcblk0p2 179:2 0 16M 0 part ├─mmcblk0p3 179:3 0 2G 0 part ├─mmcblk0p4 179:4 0 16M 0 part ├─mmcblk0p5 179:5 0 2G 0 part ├─mmcblk0p6 179:6 512B 0 part ├─mmcblk0p7 179:7 512B 0 part ├─mmcblk0p8 179:8 16M 0 part ├─mmcblk0p9 179:9 512B 0 part ├─mmcblk0p10 179:10 512B 0 part ├─mmcblk0p11 179:11 8M 0 part └─mmcblk0p12 179:12 16M 0 part

How to delete the SD card to be completely blank, then start again?

ls bcm2708-rpi-0-w.dtb bootcode.bin recovery.elf bcm2708-rpi-b.dtb boot-rbp2 RECOVERY_FILES_DO_NOT_EDIT bcm2708-rpi-b-plus.dtb BUILD-DATA recovery.img bcm2708-rpi-cm.dtb defaults recovery.rfs bcm2709-rpi-2-b.dtb INSTRUCTIONS-README.txt riscos-boot.bin bcm2710-rpi-3-b.dtb os root0 bcm2710-rpi-3-b-plus.dtb overlays root-rbp2 bcm2710-rpi-cm3.dtb RECOVERY SD Card boot recovery7.img SETTINGS boot0 recovery.cmdline share sudo rm -drf boot rm: cannot remove ‘boot/overlays/adau7002-simple.dtbo’: Read-only file system

Changed position of lock key on side of SD card holder, same read-only error.

Please, how to start with a new SD card?

Improve this question
0

1 Answer 1

Reset to default
1

If you want Raspbian don’t bother with Noobs.

1 Download Raspbian Stretch with Desktop (no need to unzip) https://www.raspberrypi.org/downloads/raspbian/

2 Flash to sd card with Etcher https://etcher.io

3 Place sd card in Pi and boot

Improve this answer
3
  • Thanks for this suggestion. Followed the instructions on the github page (github.com/resin-io/etcher). Even though the lock switch is up (towards the terminals connectors), the raspberry pi sd card holder is "locked" according to the etcher dialogue window. Any advice? Commented Aug 26, 2018 at 17:16
  • Try another sd card. Commented Aug 26, 2018 at 20:45
  • yep, sounds like the SD card is toast Commented Aug 26, 2018 at 23:05

Start asking to get answers

Find the answer to your question by asking.

Ask question

Explore related questions

See similar questions with these tags.