286

After enabling set mouse=a, text copied inside of Vim will not paste outside of Vim. Is there a way to fix this?

Here, selecting text with the mouse turns on visual mode and disables the Copy option in the popup menu:

Enter image description here

Improve this question
3
  • 2
    If your vim is compiled with +clipboard and mouse=a, you will be able to copy/paste from/to vim without using terminal popup menu. You can check if clipboard is enable using vim --version. Commented Dec 14, 2016 at 9:30
  • @Jezz Worth clarifying that A)mouse=a is not a compile option it's something in vimrc B) When vim was compiled with +clipboard it allows you to copy/paste when :set number is on, and without copy/pasting the numbers, though perhaps you still have to do some mappings C) One doesn't have to recompile VIM themselves, it may be on in the vim on some package managers supported by whichever OS.. On osx, brew's vim has it though osx's default vim doesn't. My answer mentions this re osx. Commented May 17, 2019 at 5:24
  • Maybe installing xsel works for you too, you can select text with editor or with mouse and hit ctrl+c to copy text, by the way it is for neovim, github.com/neovim/neovim/issues/7945#issuecomment-361970165 Commented Oct 31, 2019 at 14:52

16 Answers 16

Reset to default
516

Press Shift while selecting with the mouse. This will make mouse selection behave as if mouse=a was not enabled.

Note: this trick also applies to "middle button paste": if you want to paste in Vim text that was selected outside, press Shift while clicking the middle button. Just make sure that insert mode is activated when you do that (you may also want to :set paste to avoid unexpected effects).

OS X (Mac): hold Alt/Option while selecting (source)

Improve this answer
Sign up to request clarification or add additional context in comments.

10 Comments

OK, this is indeed the solution. But what if you want to select a lot of code that is more than on your screen? (then you have to scroll and select at the same time)
There is also an option to use block select by pressing <kbd>ctrl</kbd> + <kbd>shift</kbd> + left mouse button to start block selection. Mouse middle button pastes copied content into other window.
If you have line numbers (as the screenshot shows) then when selecting using ALT on a Mac OS X then the line numbers are also copied. It is better in this case to use ALT + CMD when selecting for Block Selection mode so you can avoid selecting the numbers.
For Mac Terminal, after OS X 10.11 El Capitan, Fn key is the right way to go. I.e, (with mouse=a enable) selecting text while press Fn key, then use CMD + C to copy and paste to anywhere you want.
I don't know how that answer has so many upvotes. If you enabled mouse support to avoid copying line numbers then this suggestion is totally useless.
|
65

Use ", +, y after making a visual selection either with the keyboard or the mouse. You shouldn’t be using the terminal’s copy command anyway, because that copies what the terminal sees instead of the actual content. Here is what this does:

  • ",+ tells Vim to use the register named + for the next delete, yank or put. The register named + is a special register, it is the X11 clipboard register. (On other systems, you would use * instead, I think, see :help clipboard and :help x11-selection)
  • y is the yank command, which tells Vim to put the selection in the register named previously.

You could map it like this:

:vmap <C-C> "+y

And then highlight something with the mouse and press Control-C to copy it.

This feature only works when Vim has been compiled with the +xterm_clipboard option. Run vim --version to find out if it has.

Improve this answer

8 Comments

Or possibly "*y depending on OS.
That worked! However, the combination is pretty complex, 4 buttons actually.. Probably I need to map the other one while using "shift" way from the other answer.
Mapping works perfectly fine also :) Now I don't know which of the answers from you guys should I mark as accepted :)
For me this is a better solution than the accepted answer because with this method, line numbers are not copied.
What about +clipboard? And what about +clipboard with xterm_clipboard off?
|
23

Instead of set mouse=a, use set mouse=r in .vimrc.

Improve this answer

5 Comments

But it disables scrolling
Please say why. At a glance, this seems basically the same as disabling mouse mode completely, which is not the point of the question.
@Mikel right, see my answer also Josh Lee's answer may help
Unfortunately, this will also copy the line numbers if they are enabled.
Also, if the goal is to disable mouse reporting completely, I believe a more idiomatic way to do that is :set mouse=. The only reason that :set mouse=r works is because it disables mouse reporting for everything except for certain prompts when the intention here is more likely to disable mouse reporting for everything.
19

On OS X, use Fn instead of Shift.

Improve this answer

1 Comment

worked for me with option key which is alt key equivalent on MacOS host. It was remote terminal on debian9 though. didn't worked by adding either of set mouse=a / set mouse=r in /etc/vim/vimrc on remote.
8

Another OS X-Mac option is to uncheck menu View → Allow Mouse Reporting (or press ⌘ + R to toggle it). This allows you to toggle between mouse interaction and mouse selecting, which might be useful when selecting and copy/pasting a few bits, because you don't have to hold a modifier key to do it.

Note for Multiline with line numbers:

I usually have line numbers enabled, so this will also copy the line numbers if you select multiple lines. If you want to copy multiple lines without the line numbers, disable the numbers with :set nonu and then you can :set nu to re-enable them after you're done copying.

Improve this answer

Comments

6

In Ubuntu, it is possible to use the X-Term copy & paste bindings inside VIM (Ctrl + Shift + C and Ctrl + Shift + V) on text that has been highlighted using the Shift key.

Improve this answer

Comments

1

I accidently explained how to switch off set mouse=a, when I reread the question and found out that the OP did not want to switch it off in the first place. Anyway for anyone searching how to switch off the mouse (set mouse=) centrally, I leave a reference to my answer here: https://unix.stackexchange.com/a/506723/194822

Improve this answer

Comments

1

Add set clipboard=unnamed to your .vimrc. So it will use the clipboard register '*' instead of the unnamed register for all yank, delete, change and put operations (note it does not only affect the mouse).

The behavior of register '*' depends on your platform and how your vim has been compiled (or if you use neovim).

If it does not work, you can try with set clipboard=unnamedplus, but this option only makes sense on X11 systems (and gvim therefore).

Improve this answer

Comments

1

You can use :set mouse& in the Vim command line to enable copy/paste of text selected using the mouse. You can then simply use the middle mouse button or Shift + Insert to paste it.

Improve this answer

1 Comment

Then when you have :set number it highlights numbers. So not much good. So you undo the good done by set mouse=a
1

Compilation settings that Vim was compiled with, are part of the issue. vim --version shows these.

In OS X, the default Vim has -clipboard. But you need +clipboard.

On OS X, you can and apparently generally should, use MacVim. You can do brew cask install macvim. That one has +clipboard.

Them you'll have two Vim installations.

~$ ls -l /usr/bin/vim <--- default vim -rwxr-xr-x 1 root wheel 1745984 15 Jul 2017 /usr/bin/vim ~$ ls -l /usr/local/bin/vim <-- macvim, installed recently via that mentioned brew line. lrwxr-xr-x 1 apple admin 42 16 May 23:32 /usr/local/bin/vim -> /Applications/MacVim.app/Contents/bin/mvim

Running Vim will run MacVim, because /usr/local/bin should be before /usr/bin in the path, though you can check with which vim.

Running Vim (to run MacVim), is fine, but you may want to map vi to MacVim, because otherwise running vi stays at the default Vim! You can rewrite or delete (with rm) and recreate the vi symbolic link, with ln. And to do that without an 'operation not permitted" error, you have to (temporarily) disable SIL. How do I disable System Integrity Protection (SIP) AKA "rootless" on macOS?.

MacVim has +clipboard as shown by vim --version.

Here is a working ~/.vim/vimrc with just the required lines.

:set mouse=a :map <leader>c "+y :map <leader>v "+p

The default leader key is backslash.

I read a suggestion that one should use the leader key... (certainly control has many keys already in use, so the suggestion was to not use control. I don't know if that applies to command key too, but anyhow).

With that mentioned mapping, \c will do "+y which will copy from the register known as +, to the clipboard. And \v will paste from the register known as +.

So that's a copy/paste that works between windows.

Another OS may require "* rather than "+.

Improve this answer

1 Comment

Both vims have -xterm_clipboard. Maybe a +xterm_clipboard would be beneficial in some way but it doesn't matter to this solution.
0

Also worth mentioning, by having set mouse=nvi, when doing a selection and then pressing : <ESC> you will get the mouse selection copied to the primary selection clipboard (equivalent to a "*y).

Reference: help mouse

Main advantage of this method is the fact that if you have multiple vertical splits, it will only select from the current buffer. Using <Shift> as mentioned in the main answer, will, in this case, copy from all 3 files at the same time which is not exactly what one would want, expect or need.

Improve this answer

Comments

0

If you are using a PuTTY session, then it automatically copies the selection. If we have used "set mouse=a" option in Vim, selecting using Shift + Mouse drag selects the text automatically. One needs to check in X-term.

Improve this answer

Comments

0

A good workaround which is worth adding:

The GPM daemon can be used which is a cut and paste utility and mouse server for virtual consoles. It will provide functionalities across all the virtual consoles!

Copy-paste actions can be done by Ctrl + C and Ctrl + V.

sudo apt-get install gpm

Man pages of GPM

Improve this answer

Comments

0

Set set mouse=a in vi, using MobaXterm, after installing vim-gtk3 on the server, dragging with mouse and Ctrl + Insert works, but seems it only work with MobaXterm.

After installing vim-gtk3, vi will link to it:

sudo apt install gvim

Output:

[sudo] password for lala: Reading package lists... Done Building dependency tree... Done Reading state information... Done Package gvim is a virtual package provided by: vim-gtk3 2:8.2.2434-3ubuntu3.2 vim-athena 2:8.2.2434-3ubuntu3.2 You should explicitly select one to install. E: Package 'gvim' has no installation candidate

And:

which vi

Output:

/usr/bin/vi

And:

file /usr/bin/vi

Output:

/usr/bin/vi: symbolic link to /etc/alternatives/vi

And:

file /etc/alternatives/vi

Output:

/etc/alternatives/vi: symbolic link to /usr/bin/vim.gtk3
Improve this answer

Comments

0

Hold down Shift and then click the right mouse button.

Improve this answer

1 Comment

Why so simple after more than seven years? Why did the previous answers miss it?
-3

In ESC mode, when set mouse=a, select the text using the mouse. This would enable the visual mode in Vim. Then you can press Y to yank the selected text and P to paste it wherever you want. This happens only within Vim.

Improve this answer

1 Comment

no this won't work for when you paste outside of vim

Start asking to get answers

Find the answer to your question by asking.

Ask question

Explore related questions

See similar questions with these tags.