I'm trying to interface LCD for my new WaRP (imx7s-solo). (we can found both LCD and WaRP7 here LCD and WaRP7 product) The problem is I can not have enough knowledge to verify my work is right or wrong. (I'm an application developer actually...). My work are below:
First try: I build & install core-image-sato on board. After checking boot log, I see there are driver is loaded, the result is LCD is ON but only white screen. Logs are backlight supply power not found, using dummy regulator MIPI DSI driver module loaded
30760000.mipi-dsi supply disp-power-on not found, using dummy regulator mxc_mipi_dsi_samsung 30760000.mipi-dsi: i.MX MIPI DSI driver probed MIPI DSI driver module loaded
30730000.lcdif supply lcd not found, using dummy regulator mxc_mipi_dsi_samsung 30760000.mipi-dsi: MIPI DSI dispdrv inited! mxsfb 30730000.lcdif: registered mxc display driver mipi_dsi_samsung Console: switching to colour frame buffer device 40x40 mxsfb 30730000.lcdif: initialized
Next I tried to build and run few things to check that I can display something on screen before continue to work. use some commands "startx", "cp /dev/urandom /dev/fb0"..etc but screen still remains white only. Other tried, I run Qt Helloworld application on WaRP7 and it keep showing error "Bus error" nothing more.... => If possible, please help me clarify few thing
which is the right path should I follow ?
with the steps above, is there any chance or additional step to display something on LCD (console or anything)
Note: this is only the most positive way (I think). I've google-ed it & try many other ways for weeks. (For example: use fbtft notro driver, writing driver....etc)
