I'm trying to build the 4.13.2 kernel for void linux to get the Vega drivers and I can't get it to boot.
Build process:
cp /boot/config-4.12 .config yes "" | make oldconfig make nconfig Changed processor type Include ext4 by default Made sure AMD drivers are included make -j32 bzImage modules make modules_install System.map /boot/System.map-4.13.2 arch/x86/boot/bzImage /boot/vmlinuz-4.13.2 .config /boot/config-4.13.2 dracut -f /boot/initramfs-4.13.2.img 4.13.2 update-grub I tried to base the config from the existing one, which boots okay.
After a while it drops into the dracut debug shell. dmesg is full of "Scanning for all btrfs devices" until the message "Could not boot". Neither /dev/nvme* nor /dev/disk/by-uuid exists.
fstab:
/dev/nvme0n1p1 swap swap sw 0 0 /dev/nvme0n1p2 / ext4 defaults 0 1 /dev/nvme0n1p3 /home ext4 defaults 0 2 tmpfs /tmp tmpfs defaults,nosuid,nodev 0 0 I did get some errors when creating initramfs, but I don't see how they are related:
> dracut -f /boot/initramfs-4.13.2.img 4.13.2 dracut: Executing: /usr/bin/dracut -f /boot/initramfs-4.13.2.img 4.13.2 dracut: dracut module 'bootchart' will not be installed, because command '/sbin/bootchartd' could not be found! dracut: dracut module 'modsign' will not be installed, because command 'keyctl' could not be found! dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found! dracut: dracut module 'url-lib' will not be installed, because command 'curl' could not be found! dracut: dracut module 'plymouth' will not be installed, because command 'plymouthd' could not be found! dracut: dracut module 'plymouth' will not be installed, because command 'plymouth' could not be found! dracut: dracut module 'plymouth' will not be installed, because command 'plymouth-set-default-theme' could not be found! dracut: dracut module 'lvmmerge' will not be installed, because command 'lvm' could not be found! dracut: 90crypt: Could not find any command of '/systemd-cryptsetup cryptsetup'! dracut: dracut module 'dmraid' will not be installed, because command 'dmraid' could not be found! dracut: dracut module 'dmsquash-live-ntfs' will not be installed, because command 'ntfs-3g' could not be found! dracut: dracut module 'lvm' will not be installed, because command 'lvm' could not be found! dracut: dracut module 'mdraid' will not be installed, because command 'mdadm' could not be found! dracut: dracut module 'multipath' will not be installed, because command 'multipath' could not be found! dracut: dracut module 'crypt-gpg' will not be installed, because command 'gpg' could not be found! dracut: dracut module 'cifs' will not be installed, because command 'mount.cifs' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found! dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found! dracut: *** Including module: bash *** dracut: *** Including module: dash *** dracut: *** Including module: i18n *** dracut: *** Including module: drm *** dracut-install: ERROR: installing '=drivers/gpu/drm' dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.jgsVnm/initramfs --kerneldir /lib/modules/4.13.2/ -m -s drm_crtc_init =drivers/gpu/drm dracut: *** Including module: btrfs *** dracut: *** Including module: kernel-modules *** dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies *** dracut: *** Installing kernel module dependencies done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done*** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Store current command line parameters *** dracut: *** Creating image file '/boot/initramfs-4.13.2.img' *** dracut: *** Creating initramfs image file '/boot/initramfs-4.13.2.img' done *** I'm not sure what the next steps are?
