39

I have a Raspberry Pi connected to Ethernet and with a Mac (though USB cable).

I'm trying to SSH in the Pi but I don't know the IP address. I have tried :

 ifconfig

but I have I can't see eth0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether a8:20:66:09:f8:36 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 7c:d1:c3:d8:b5:dd inet6 fe80::7ed1:c3ff:fed8:b5dd%en1 prefixlen 64 scopeid 0x5 inet 192.168.91.16 netmask 0xffffff00 broadcast 192.168.91.255 media: autoselect status: active fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:3e:e1:ff:fe:7f:a0:82 media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0e:d1:c3:d8:b5:dd media: autoselect status: inactive
Improve this question
5

12 Answers 12

Reset to default
21

In your edited question, it appears the IP is listed under en0 as 192.168.91.16, assuming that your ifconfig output is coming from the RPi.

Improve this answer
1
  • Con gusto :) And fwiw, the other utilities Pi Filler and Pi Copier are pretty useful, too. Commented Dec 23, 2013 at 20:14
30

You can lookup the IP address by hostname. Assuming the hostname of your Pi is "raspberrypi"

Here is how you obtain the IP address using ping command and hostname.

From Linux: ping raspberrypi
From Windows: ping raspberrypi
From OS X: ping raspberrypi.local

In order for the command to work from Windows, you need to have Samba running on your Pi. You can install Samba using the command sudo apt-get install samba.

Improve this answer
8
  • 3
    Using samba on a RPi just to broadcast its hostname is like killing a fly with a sledgehammer. Better use avahi. thomasloughlin.com/… Commented Feb 26, 2014 at 12:18
  • Some people want the easiest solution. Some people want the most efficient solution. For those looking for an easy solution, it cannot get easier than the one line command to install samba. Plus the avahi solution that you suggested works easily only from OS X. If you want to make it work from Windows, you need Bonjour which you get by installing iTunes. So you are basically replacing the samba sledgehammer with the iTunes sledgehammer. Commented Feb 26, 2014 at 16:24
  • Though I think the number of people who have iTunes installed because they need it anyways for their iDevice is greater than the number of people with Samba. @geoji Commented Feb 27, 2014 at 7:39
  • You don't need to install samba on the client machine. Samba needs to be installed just once on the raspberry Pi. The downside of the iTunes approach is that you need to have it installed on every single machine from which you need to find the IP address from. Commented Feb 27, 2014 at 18:46
  • 1
    ping raspberrypi.local works on windows in the web browser and for ssh on a new raspbian system out of the box with a ssh file in boot. both samba and itunes are unnecessary. Commented Aug 26, 2019 at 12:21
13

Are the Pi and the Mac in the same network? In that case, I just used arp -a to find it. There's a number of other methods though, listed here: https://apple.stackexchange.com/questions/19783/how-do-i-know-the-ip-addresses-of-other-computers-in-my-network?rq=1

Improve this answer
4
  • 3
    arp -a will work if, and only if, the Mac already successfully probed or connected to a host. Try yourself by restarting your Mac and displaying the arp table. It will be almost empty. To populate that table you need to run something like a ping scan: nmap -sP 192.168.91.0/24 Commented Feb 26, 2014 at 14:07
  • @ripat Wow, that renders it almost useless. Commented Feb 27, 2014 at 7:36
  • 1
    Workaround: nmap -sP 192.168.91.0/24 | awk '/^Nmap/{ip=$NF}/B8:27:EB/{print ip}' see my comment on this thread Commented Feb 27, 2014 at 8:11
  • ... and you need to run that above command as root sudo nmap ..... Commented Feb 27, 2014 at 8:29
6

I developed a cross-platform tool for finding local IP address of Raspberry Pi faster:

The article about it: Pi-oi: a Tool for Finding the Local IP Address of Your Raspberry Pi

Improve this answer
3
  • Super! Works great! Commented Oct 13, 2016 at 9:52
  • Tested. Observed: Wrongly recognized Orange Pi as Pi! However could not recognize Raspbian on Rpi 0 & Rpi 2 even when Host response shows Raspbian. Commented Jul 24, 2017 at 12:33
  • Can you paste a shot screen? Commented Jul 24, 2017 at 12:39
5

Using ping and arp wouldn't work for me, because on my network, the raspberry has been assigned a different hostname.

But I succeeded using lsleases, this is also recommended on the Raspberry PI site.

After installing lsleases, start the server with sudo lsleases -s; then reboot your Raspberry PI and wait for the IP address to appear.

$ sudo lsleases -s [sudo] password for sebastian: 2015/01/15 15:36:40 startup - version: 1.4.0 2015/01/15 15:36:40 enable active check - ping every: 15m # Reboot your Raspberry PI and wait 2015/01/15 15:37:10 new DHCP Lease: '132.231.71.116 b8:27:eb:f5:c3:4a raspberrypi'

Voila...

Improve this answer
1
  • IMO best answer, fastest and 100% work guarantee. Commented Jan 17, 2021 at 12:36
2

'en1' is your ethernet address using 'ifconfig'. But you don't need to look up IP addresses - that's what Hostnames and DNS are for. You say you're on a mac, so just 'ssh [email protected]'. Let DNS do the work in the background. If you had given your PI a hostname, say, 'papagoose', and you have a username of 'mama', type 'ssh [email protected]'. If you are secure shelling from a windows OS, just drop the '.local'.

Improve this answer
1

If it's your home network, you can easily login to your router as most of them display client IP addresses somewhere in there. Your router IP can be found by typing ipconfig (Windows) or ifconfig (Mac, Linux, etc.) and it will be listed under Gateway. The router IP is commonly 192.168.1.1.

Improve this answer
1

If you want to use a GUI application for it, you can use Yakala tool (https://github.com/mozcelikors/yakala) for Debian/Ubuntu. This tool helps you not only search for available Type B and Type C networks, but also helps you to directly SSH into the network:

sudo add-apt-repository ppa:mozcelikors/yakala sudo apt-get update sudo apt-get install yakala

or

git clone https://github.com/mozcelikors/yakala cd yakala && sudo ./install.sh

https://raw.githubusercontent.com/mozcelikors/yakala/master/docs/img/peekx2.gif

Disclaimer: I am the creator of Yakala. Any suggestions/bugs are taken very seriously.

Improve this answer
1

For me arp works perfectly most of the times if you mac and raspberry are in the same network.

arp -na | grep b8:27

or you can use nmap (Change CIDR with yours)

nmap -sn 192.168.1.0/24

https://installvirtual.com/find-ip-of-raspberry-pi/

Improve this answer
1
  • Using arp and nmap was already said in previous answers. It doesn't help just repeating answers. Commented Mar 4, 2019 at 16:32
1

It's actually quite simple. Once your pi is connected to wifi, you can just use [email protected]. For the default settings, your command would be the following:

ssh [email protected]

Update: It actually works for other OS's, I think.

Improve this answer
1
  • 1
    This should be the accepted answer! Commented Jan 16, 2022 at 11:45
0

This is how I login to my Raspberry Pi:

IP=$(sudo nmap -p 22 --open -sV 192.168.0.0/24 | grep 192 | awk '{print $NF}') && ssh pi@$IP

Find open SSH port on the local network, get the ip, SSH into it.

Improve this answer
0

I spend little time on it to figure out and finally one solution that worked fine.

Have a look at this one http://angryip.org/download/#windows

I believe "arp -a" will also give the IP but the tool which I mentioned above will give info in detail.

enter image description here

Improve this answer

Start asking to get answers

Find the answer to your question by asking.

Ask question

Explore related questions

See similar questions with these tags.