In modern git (I'm writing this in 2022, with an updated git installation), this has become quite a bit simpler:

• Run git rm <path-to-submodule>, and commit.

This removes the filetree at <path-to-submodule>, and the submodule's entry in the .gitmodules file. I.e. all traces of the submodule in your repository proper are removed.

As the docs note however, the .git dir of the submodule is kept around (in the modules/ directory of the main project's .git dir), "to make it possible to checkout past commits without requiring fetching from another repository".
If you nonetheless want to remove this info, manually delete the submodule's directory in .git/modules/, and remove the submodule's entry in the file .git/config. These steps can be automated using the commands

• rm -rf .git/modules/<path-to-submodule>, and
• git config --remove-section submodule.<path-to-submodule>.

Caution: content below is older community wiki instructions. Ignore if you have a modern git:

Via the page Git Submodule Tutorial:

To remove a submodule you need to:

1. Delete the relevant section from the .gitmodules file.
2. Stage the .gitmodules changes:
   git add .gitmodules
3. Delete the relevant section from .git/config.
4. Remove the submodule files from the working tree and index:
   git rm --cached path_to_submodule (no trailing slash).
5. Remove the submodule's .git directory:
   rm -rf .git/modules/path_to_submodule
6. Commit the changes:
   git commit -m "Removed submodule <name>"
7. Delete the now untracked submodule files:
   rm -rf path_to_submodule

See also: alternative steps below.

The majority of answers to this question are outdated, incomplete, or unnecessarily complex.

A submodule cloned using git 1.7.8 or newer will leave at most four traces of itself in your local repo. The process for removing those four traces is given by the three commands below:

# Remove the submodule entry from .git/config git submodule deinit -f path/to/submodule # Remove the submodule directory from the superproject's .git/modules directory rm -rf .git/modules/path/to/submodule # Remove the entry in .gitmodules and remove the submodule directory located at path/to/submodule git rm -f path/to/submodule 

Just a note. Since git 1.8.5.2, two commands will do:

git rm -r the_submodule rm -rf .git/modules/the_submodule 

As @Mark Cheverton's answer correctly pointed out, if the second line isn't used, even if you removed the submodule for now, the remnant .git/modules/the_submodule folder will prevent the same submodule from being added back or replaced in the future. Also, as @VonC mentioned, git rm will do most of the job on a submodule.

--Update (07/05/2017)--

Just to clarify, the_submodule is the relative path of the submodule inside the project. For example, it's subdir/my_submodule if the submodule is inside a subdirectory subdir.

As pointed out correctly in the comments and other answers, the two commands (although functionally sufficient to remove a submodule), do leave a trace in the [submodule "the_submodule"] section of .git/config (as of July 2017), which can be removed using a third command:

git config -f .git/config --remove-section submodule.the_submodule 2> /dev/null 

Simple steps

1. Remove config entries:
   git config -f .git/config --remove-section submodule.$submodulename
git config -f .gitmodules --remove-section submodule.$submodulename
2. Remove directory from index:
   git rm --cached $submodulepath
3. Commit
4. Delete unused files:
   rm -rf $submodulepath
rm -rf .git/modules/$submodulename

Please note: $submodulepath doesn't contain leading or trailing slashes.

Background

When you do git submodule add, it only adds it to .gitmodules, but once you did git submodule init, it added to .git/config.

So if you wish to remove the modules, but be able to restore it quickly, then do just this:

git rm --cached $submodulepath git config -f .git/config --remove-section submodule.$submodulepath 

It is a good idea to do git rebase HEAD first and git commit at the end, if you put this in a script.

Also have a look at an answer to Can I unpopulate a Git submodule?.

To remove a submodule added using:

[email protected]:repos/blah.git MOD_DIR=lib/blah git submodule add $REPOSITORY $MOD_DIR 

Run:

git rm $MOD_DIR 

That's it.

For old versions of git (circa ~1.8.5, actually even in 2.26.2) use:

git submodule deinit $MOD_DIR git rm $MOD_DIR git config -f .gitmodules --remove-section submodule.$MOD_DIR 

In addition to the recommendations, I also had to rm -Rf .git/modules/path/to/submodule to be able to add a new submodule with the same name (in my case I was replacing a fork with the original)

You must remove the entry in .gitmodules and .git/config, and remove the directory of the module from the history:

git rm --cached path/to/submodule 

If you'll write on git's mailing list probably someone will do a shell script for you.

I found deinit works good for me:

git submodule deinit <submodule-name> git rm <submodule-name> 

From git docs:

deinit

Unregister the given submodules, i.e. remove the whole submodule.$name section from .git/config together with their work tree.

You can use an alias to automate the solutions provided by others:

[alias] rms = "!f(){ git rm --cached \"$1\";rm -r \"$1\";git config -f .gitmodules --remove-section \"submodule.$1\";git config -f .git/config --remove-section \"submodule.$1\";git add .gitmodules; }; f" 

Put that in your git config, and then you can do: git rms path/to/submodule

To summarize, this is what you should do :

1. Set path_to_submodule var (no trailing slash):

   path_to_submodule=path/to/submodule

2. Delete the relevant line from the .gitmodules file:

   git config -f .gitmodules --remove-section submodule.$path_to_submodule

3. Delete the relevant section from .git/config

   git config -f .git/config --remove-section submodule.$path_to_submodule

4. Unstage and remove $path_to_submodule only from the index (to prevent losing information)

   git rm --cached $path_to_submodule

5. Track changes made to .gitmodules

   git add .gitmodules

6. Commit the superproject

   git commit -m "Remove submodule submodule_name"

7. Delete the now untracked submodule files

   rm -rf $path_to_submodule

   rm -rf .git/modules/$path_to_submodule

If the submodule was accidentally added because you added, committed and pushed a folder that was already a Git repository (contained .git), you won’t have a .gitmodules file to edit, or anything in .git/config. In this case all you need is :

git rm --cached subfolder git add subfolder git commit -m "Enter message here" git push 

FWIW, I also removed the .git folder before doing the git add.

1. git submodule deinit <path to submodule>
2. Remove the section from .gitmodules
3. git rm <path to submodule>
4. Delete the module files which you need to remove from your project.
5. Add the deleted files to git and call git add .gitmodules
6. Commit and Push

After experimenting with all the different answers on this site, I ended up with this solution:

#!/bin/sh path="$1" if [ ! -f "$path/.git" ]; then echo "$path is no valid git submodule" exit 1 fi git submodule deinit -f $path && git rm --cached $path && rm -rf .git/modules/$path && rm -rf $path && git reset HEAD .gitmodules && git config -f .gitmodules --remove-section submodule.$path 

This restores the exact same state as before you added the submodule. You can right away add the submodule again, which was not possible with most of the answers here.

git submodule add $giturl test aboveScript test 

This leaves you with a clean checkout with no changes to commit.

This was tested with:

$ git --version git version 1.9.3 (Apple Git-50) 

What I'm currently doing Dec 2012 (combines most of these answers):

oldPath="vendor/example" git config -f .git/config --remove-section "submodule.${oldPath}" git config -f .gitmodules --remove-section "submodule.${oldPath}" git rm --cached "${oldPath}" rm -rf "${oldPath}" ## remove src (optional) rm -rf ".git/modules/${oldPath}" ## cleanup gitdir (optional housekeeping) git add .gitmodules git commit -m "Removed ${oldPath}" 

I recently find out a git project which include many useful git related command: https://github.com/visionmedia/git-extras

Install it and type :

git delete-submodule submodule 

Then things are done. The submodule directory will be removed from your repo and still exist in your filesystem. You can then commit the change like: git commit -am "Remove the submodule".

Here is what I did :

1.) Delete the relevant section from the .gitmodules file. You can use below command:

git config -f .gitmodules --remove-section "submodule.submodule_name" 

2.) Stage the .gitmodules changes

git add .gitmodules 

3.) Delete the relevant section from .git/config. You can use below command:

git submodule deinit -f "submodule_name" 

4.) Remove the gitlink (no trailing slash):

git rm --cached path_to_submodule 

5.) Cleanup the .git/modules:

rm -rf .git/modules/path_to_submodule 

6.) Commit:

git commit -m "Removed submodule <name>" 

7.) Delete the now untracked submodule files

rm -rf path_to_submodule 

All the answers look outdated. I am using git version 2.28.0. One line answer is,

git rm path-to-submodule 

However, even though the submodule is removed from source control, .git/modules/path-to-submodule still contains the submodule repository and .git/config contains its URL, so you still have to remove those manually:

git config --remove-section submodule.path-to-submodule rm -rf .git/modules/path-to-submodule 

Sometimes, you have to use the -f flag:

$ git rm -f img2vec 

For example, because you might get an error like this:

$ git rm img2vec/ error: the following file has changes staged in the index: img2vec (use --cached to keep the file, or -f to force removal) 

For the benefit of the reader, this here tries to sum it up and give a step-by-step guide on how to do it if things do not work as expected. Following is the tested and safe way for git version 2.17 and above to get rid of a submodule:

submodule="path/to/sub" # no trailing slash! git submodule deinit -- "$submodule" git rm -- "$submodule" 

• If this does not work for you, see below.
• No options. Nothing dangerous. And do not even consider doing more!
• Tested with Debian Buster 2.20.1 and Ubuntu 18.04 2.17.1.
• "$submodule" is just to emphasize where to put the name, and that you have to be careful with spaces and the like
• If on Windows ignore the first line and replace "$submodule" with the Windows way of a properly specified path to the submodule. (I am not Windows)

Warning!

Never touch the insides of the .git directory yourself! Editing inside .git enters the dark side. Stay away at all cost!

And yes, you can blame git for this, as many handy things were missing in git in the past. Like a proper way to remove submodules again.

I think there is a very dangerous part in the documentation of git submodule. It recommends to remove $GIT_DIR/modules/<name>/ yourself. In my understanding this is not only plain wrong, it is extremely dangerous and provokes major headaches in future! See below.

Note that

git module deinit 

is the direct inverse to

git module init 

but

git submodule deinit -- module git rm -- module 

also is quite the inverse to

git submodule add -- URL module git submodule update --init --recursive -- module 

because some commands basically need to do more than just a single thing:

• git submodule deinit -- module
  • (1) updates .git/config
• git rm
  • (2) removes the files of the module
  • (3) thereby recursively removes the submodules of the submodule
  • (4) updates .gitmodules
• git submodule add
  • pulls in the data to .git/modules/NAME/
  • (1) does git submodule init, so updates .git/config
  • (2) does git submodule update, so, nonrecursively checks out the module
  • (4) updates .gitmodules
• git submodule update --init --recursive -- module
  • pulls in further data if needed
  • (3) checks out the submodules of the submodule recursively

This cannot be fully symmetric, as keeping it strictly symmetric does not make much sense. There simply is no need for more than two commands. Also "pulling in the data" is implicit, because you need it, but removing the cached information is not done, because this is not needed at all and might wipe precious data.

This truly is puzzling to newcomers, but basically is a good thing: git just does the obviously thing and does that right, and does not even try to do more. git is a tool, which must do a reliable job, instead of being just another "Eierlegende Wollmilchsau" ("Eierlegende Wollmilchsau" translates for me to "some evil version of a Swiss army knife").

So I understand complaints of people, saying "Why doesn't do git the obvious thing for me". This is because "obvious" here depends from the point of view. Reliability in each and every situation is far more important. Hence what's obvious for you often is not the right thing in all possible technical situations. Please remember that: AFAICS git follows the technical path, not the social one. (Hence the clever name: git)

If this fails

The commands above may fail due to following:

• Your git is too old. Then use a newer git. (See below how to.)
• You have uncommitted data and might lose data. Then better commit them first.
• Your submodule is not clean in a git clean sense. Then first clean your submodule using that command. (See below.)
• You have done something in the past which is unsupported by git. Then you are on the dark side and things get ugly and complicated. (Perhaps using another machine fixes it.)
• Perhaps there are more ways to fail I am not aware of (I am just some git power-user.)

Possible fixes follow.

Use a newer git

If your machine is too old there is no submodule deinit in your git. If you do not want (or can) update your git, then just use another machine with a newer git! git is meant to be fully distributed, so you can use another git to get the job done:

• workhorse:~/path/to/worktree$ git status --porcelain must not output anything! If it does, cleanup things first!
• workhorse:~/path/to/worktree$ ssh account@othermachine
• othermachine:~$ git clone --recursive me@workhorse path/to/worktree/.git TMPWORK && cd TMPWORK
• Now do the submodule stuff
• othermachine:~/TMPWORK$ git commit . -m . && exit
• workhorse:~/path/to/worktree$ git fetch account@othermachine:TMPWORK/.git
• workhorse:~/path/to/worktree$ git merge --ff-only FETCH_HEAD. If this does not work, use git reset --soft FETCH_HEAD
• Now cleanup things, until git status is clean again. You are able to do so, because you have had it clean before, thanks to the first step.

This othermachine can be some VM, or some Ubuntu WSL under Windows, whatever. Even a chroot (but I assume that you are non-root, because if you are root it should be more easy to update to the newer git).

Note that if you cannot ssh in, there are trainloads of ways to transport git repositories. You can copy your worktree on some USB stick (including the .git directory), and clone from the stick. Clone the copy, just to get things in a clean fashion again. This might be a PITA, in case your submodules are not accessible from othermachine directly. But there is a solution for this, too:

git config --add url.NEWURLPREFIX.insteadOf ORIGINALURLPREFIX 

You can use this multiply, and this is saved into $HOME/.gitconfig. Something like

git config --add 'url./mnt/usb/repo/.insteadof' https://github.com/ 

rewrites URLs like

https://github.com/XXX/YYY.git 

into

/mnt/usb/repo/XXX/YYY.git 

It's easy if you start to become accustomed to powerful git features like this.

Cleanup things first

Cleaning manually up is good, because this way you perhaps detect some things you forgot about.

• If git complains about unsaved stuff, commit and push it somewhere safe.
• If git complains about some leftovers, git status and git clean -ixfd is your friend
• Try to abstain from options to rm and deinit as long as you can. Options (like -f) for git are good if you are a Pro. But as you came here, you probably are not so experienced in the submodule area. So better be safe than sorry.

Example:

$ git status --porcelain M two $ git submodule deinit two error: the following file has local modifications: two (use --cached to keep the file, or -f to force removal) fatal: Submodule work tree 'two' contains local modifications; use '-f' to discard them $ cd two $ git submodule deinit --all error: the following file has local modifications: md5chk (use --cached to keep the file, or -f to force removal) fatal: Submodule work tree 'md5chk' contains local modifications; use '-f' to discard them $ cd md5chk $ git submodule deinit --all error: the following file has local modifications: tino (use --cached to keep the file, or -f to force removal) fatal: Submodule work tree 'tino' contains local modifications; use '-f' to discard them $ cd tino $ git status --porcelain ?? NEW $ git clean -i -f -d Would remove the following item: NEW *** Commands *** 1: clean 2: filter by pattern 3: select by numbers 4: ask each 5: quit 6: help What now> 1 Removing NEW $ cd ../../.. $ git status --porcelain $ git submodule deinit two Cleared directory 'two' Submodule 'someunusedname' (https://github.com/hilbix/src.git) unregistered for path 'two' 

You see, there is no -f needed on submodule deinit. If things are clean, in a git clean sense. Also note that git clean -x is not needed. This means git submodule deinit unconditionally removes untracked files which are ignored. This is usually what you want, but do not forget about it. Sometimes ignored files might be precious, like cached data which takes hours to days to be calculated again.

Why never remove $GIT_DIR/modules/<name>/?

Probably people want to remove the cached repository, because they are afraid to run into a problem later. This is true, but running into that "problem" is the correct way to solve it! Because the fix is easy, and done right you will be able to live happily ever after. This avoids more cumbersome trouble than when you remove the data yourself.

Example:

mkdir tmptest && cd tmptest && git init && git submodule add https://github.com/hilbix/empty.git two && git commit -m . && git submodule deinit two && git rm two && git commit -m . && git submodule add https://github.com/hilbix/src.git two 

The last line outputs following error:

A git directory for 'two' is found locally with remote(s): origin https://github.com/hilbix/empty.git If you want to reuse this local git directory instead of cloning again from https://github.com/hilbix/src.git use the '--force' option. If the local git directory is not the correct repo or you are unsure what this means choose another name with the '--name' option. 

Why this error? Because .git/modules/two/ previously was populated from https://github.com/hilbix/empty.git and now shall be re-populated from something else, namely https://github.com/hilbix/src.git. You won't see this if you re-populate it from https://github.com/hilbix/empty.git

What to do now? Well, just do exactly as told! Use --name someunusedname

git submodule add --name someunusedname https://github.com/hilbix/src.git two 

.gitmodules then looks like

[submodule "someunusedname"] path = two url = https://github.com/hilbix/src.git 

ls -1p .git/modules/ gives

someunusedname/ two/ 

This way in future you can switch branches/commit forward and backward and will never get into any trouble again, due to two/ having two different (and possibly incompatible) upstream repositories. And the best is: You keep both cached locally, too.

• This is not only true for you. It also is true for all others using your repository.
• And you do not lose history. In case you forgot to push the very latest version of the old submodule, you can enter the local copy and do so later on. Note that it is quite common that somebody forgets to push some submodules (because this is a PITA for newcomers, until they became accustomed to git).

However if you removed the cached directory, both different checkouts will stumble upon each other, because you will not use the --name options, right? So each time you do the checkout you perhaps have to remove the .git/modules/<module>/ directory again and again. This is extremely cumbersome and makes it hard to use something like git bisect.

So there is a very technical reason to keep this module directory as a placeholder. People who recommend to remove something below .git/modules/ either do not know better or forget to tell you that this makes powerful features like git bisect nearly impossible to use if this crosses such a submodule incompatibility.

A further reason is shown above. Look at the ls. What do you see there?

Well, the 2nd variant of module two/ is not under .git/modules/two/, it is under .git/modules/someunusedname/! So things like git rm $module; rm -f .git/module/$module are totally wrong! You must either consult module/.git or .gitmodules to find the right thing to remove!

So not only most other answers fall into this dangerous trap, even very popular git extensions had this bug (it's now fixed there)! So better keep your hands of the .git/ directory if you do not exactly, what you are doing!

And from the philosophical view, wiping history is always wrong! Except for quantum mechanics, as usual, but this is something completely different.

FYI you probably guessed it: hilbix is my GitHub account.

In my opinion you can do this with below three steps

This command will delete content

git submodule deinit -f devops 

Now remove the directory

rm -rvf devops 

The last step is to remove entry from submodule file

git rm -f devops 

This is not it delete module directory from .git hierarchy

cd .git/modules/ && rm -rvf devops 

I had to take John Douthat's steps one step further and cd into the submodule's directory, and then remove the Git repository:

cd submodule rm -fr .git 

Then I could commit the files as a part of the parent Git repository without the old reference to a submodule.

With git v2.7.4 simple 3 steps worked just fine.

git submodule deinit -f -- a/submodule git rm -f a/submodule git commit 

The best way to remove a submodule from git:

$ git submodule deinit -f <submodule-name> $ rm -rf .git/modules/<submodule-name> $ git config -f .gitmodules --remove-section submodule.<submodule-name> $ git config -f .git/config --remove-section submodule.<submodule-name> $ git rm --cached <submodule-name> $ git commit -m 'rm submodule: <submodule-name>' 

Here are the 4 steps that I found necessary or useful (important ones first):

git rm -f the_submodule rm -rf .git/modules/the_submodule git config -f .git/config --remove-section submodule.the_submodule git commit -m "..." 

In theory, git rm in step 1 should take care of it. Hopefully, the second part of OP question can be answered positively one day (that this can be done in one command).

But as of July 2017, step 2 is necessary to remove data in .git/modules/ for otherwise, you can't e.g. add the submodule back in the future.

You can probably get away with the above two steps for git 1.8.5+ as tinlyx's answer noted, as all git submodule commands seem to work.

Step 3 removes the section for the_submodule in the file .git/config. This should be done for completeness. (The entry may cause problems for older git versions, but I don't have one to test).

For this, most answers suggest using git submodule deinit. I find it more explicit and less confusing to use git config -f .git/config --remove-section. According to the git-submodule documentation, git deinit:

Unregister the given submodules ... If you really want to remove a submodule from the repository and commit that use git-rm[1] instead.

Last but not least, if you don't git commit, you will/may get an error when doing git submodule summary (as of git 2.7):

fatal: Not a git repository: 'the_submodule/.git' * the_submodule 73f0d1d...0000000: 

This is regardless of whether you do steps 2 or 3.

I followed the instructions from this very same guide How do I remove a submodule?

$ git submodule deinit -f <submodule-name> $ rm -rf .git/modules/<submodule-name> $ git config -f .gitmodules --remove-section submodule.<submodule-name> $ git config -f .git/config --remove-section submodule.<submodule-name> $ git rm --cached <submodule-name> $ git commit -m 'rm submodule: <submodule-name>' 

But it kept saying:

fatal: no submodule mapping found in .gitmodules for path 

So what I did is including the path in .gitignore like this (With no asterisk in the end of the path):

<path> 

Then I modified any file and did a simple push:

$ git add . $ git commit -m "Ignoring sharedlibs folder <path> on .gitignore" $ git push -u origin master 

I just found the .gitmodules hidden file, it has a list... you can erase them individually that way. I just had one, so I deleted it. Simple, but it might mess up Git, since I don't know if anything's attached to the submodule. Seems ok so far, aside from libetpan's usual upgrade issue, but that's (hopefully) unrelated.

With git 2.17 and above it's just:

git submodule deinit -f {module_name} git add {module_name} git commit 

project dir: ~/foo_project/ submodule: ~/foo_project/lib/asubmodule - - - - - - - - - - - - - - - - - - - - - - - - - run: 1. cd ~/foo_project 2. git rm lib/asubmodule && rm .git/modules/lib/asubmodule && git submodule lib/asubmodule deinit --recursive --force 

If you have just added the submodule, and for example, you simply added the wrong submodule or you added it to the wrong place, simply do git stash then delete the folder. This is assuming that adding the submodule is the only thing you did in the recent repo.

To summarize, this is what you should do :

Set path_to_submodule var (no trailing slash):

path_to_submodule=path/to/submodule 

Delete the relevant line from the .gitmodules file:

git config -f .gitmodules --remove-section submodule.$path_to_submodule 

Delete the relevant section from .git/config

git config -f .git/config --remove-section submodule.$path_to_submodule 

Unstage and remove $path_to_submodule only from the index (to prevent losing information)

git rm --cached $path_to_submodule 

Track changes made to .gitmodules

git add .gitmodules 

Commit the superproject

git commit -m "Remove submodule submodule_name" 

Delete the now untracked submodule files

rm -rf $path_to_submodule rm -rf .git/modules/$path_to_submodule 

See also : Alternative guide lines